RSA-3200 CANopen Contactless Magnetic Angle Sensor

Budget-friendly price Request a quote
CANopen | 41.5 x 58 mm max. | 14-bit resolution | 6 mm shaft diameter | 12/24 VDC (8 … 34 VDC) | IP67 / IP69K | 1 or 2 channels

Novotechnik RSA-3200 CANopen Magnetic Angle Sensor. Non-contact, 360° Hall angle sensor with shaft.

Non-contact Hall angle sensor with 6 mm diameter stainless steel shaft. Measuring range up to 360°. IP67 protection (shaft side) and IP69K protection (housing). EMC compliant according to ISO and ISO 11452 pulses. Single and multi-channel versions available.

Key points

  • Contactless Hall technology, 360° electrical range
  • IP67 protection (shaft side), IP69K (housing)
  • 14-bit resolution
  • Temperature range from -40 °C to +105 °C
  • Single and multi-channel versions
  • EMC according to ISO and ISO 11452 impulses; exceeds E1 requirements
  • Stainless steel shaft Ø 6 mm

Technical Frequently Asked Questions

What can be connected to the RSA-3200 CANopen magnetic angle sensor?

It can be connected to positioners (magnets) for Novotechnik rotary sensors and MQS EEM-33-34 and EEM-33-24 connectors.

How do I order the RSA-3200 CANopen magnetic angle sensor?

The order code has 7 fields: mechanical version, digital interface, resolution, interface, parameters, speed, and connection. For example, RSA-3201-214-614-521 is the version with a standard design, digital interface, 14 bits, CANopen with 1 position and 1 speed (one channel), 250 kBaud, and a 6-pin male AMP MQS connector. All the options for each field are available in the order code configurator on this page.

Under what conditions does the RSA-3200 CANopen magnetic angle sensor operate?

Operating temperature: -40 … +105 °C. Protection: IP67 (shaft side), IP69K (housing with electronics).

Properties

FeatureSpecification
Measurement and interface
Measured variablesPosition and speed
Measuring range360°
Number of channels1 / 2
ProtocolCANopen according to CiA DS-301 V4.2.0, DS-406 V3.2 device profile, Encoder Class C2, LSS services according to CiA DS-305 V1.1.2
Programmable parametersPosition, speed, cams, working areas, direction of rotation, scale, offset, node ID, transmission speed
DiagnosisActivated (in error, the signal is outside the plausible range)
Node ID1 … 127 (default 127)
Transmission speed50 … 1000 kBaud
Update frequency (output)1 kHz
Resolution14 bits
Speed resolution360°/2^14 ≈ 0.022°/ms
Absolute linearity1 channel: ±0.5% FS; 2 channels: ±0.85% FS
Repeatability≤ ±0.1°
Hysteresis≤ ±0.1°
Temperature error±0.2 % FS
Feeding and protection
Supply voltage Ub12/24 VDC (8 … 34 VDC)
Current consumption when connected≤ 50 mA
Power consumed without load< 0.4 W
Overvoltage protection45 VDC (permanent)
Reverse polarity protectionYes (feed lines)
Short circuit protectionYes (output to GND and supply voltage up to 40 VDC)
Insulation resistance (500 VDC)≥ 10 MΩ
Internal bus termination120 Ω (optional)
Environmental conditions
Working temperature-40 … +105 °C
Maximum working speed120 rpm (temporarily 800 rpm)
Vibration IEC 60068-2-620 g, 5 … 2000 Hz, Amax = 0.75 mm
IEC 60068-2-27 Shock50 g, 6 ms
DIN EN 60529 protectionIP67 (shaft side), IP69K (enclosure with electronics)
Working humidity0 … 98 % HR (non-condensing)
Lifetypical 30 million movements (without lever)
MTTF (IEC 60050)843 years (one channel) or 819 years (two channels, per channel)
Electromagnetic compatibility
ISO 10605 ESD (handling/component)8 kV
ISO 11452-2 Radiated HF fields100 V/m
ISO 11452-5 Radiated HF fields, stripline200 V/m
CISPR 25 Radiated emissionLevel 3
ISO 7637-2 Transient emissionsLevel 3
ISO 7637-2 Impulses in the feed lines (1, 2a, 2b, 3a, 3b, 4, 5)Level 4
ISO 7637-3 Impulses on output linesLevel 4
ISO 16750 Impulses in power linesStartup profile: level 4 at 12 V / level 3 at 24 V
Emission and resistanceExceeds E1 requirements
Connection assignment
SignConnector 5..
Supply voltage UbPin 1
GNDPin 2
CAN_HPin 3, pin 6
CAN_LPin 4, pin 5
Mechanical data
HousingTemperature-resistant PBT-GF plastic with stainless steel inserts
AxisStainless steel X10CrNiS18-9 (No. 1.4305 / AISI 303)
BoardHNBR 70
Fixation2 M4 screws; tightening torque 250 ± 50 Ncm
Bearing and sealingSintered bronze bushing; double O-ring seal, fully encapsulated electronics
Mechanical tourContinuous
Allowable load on the shaft (static), axial and radial40 N / 50 N
Starting torquetypical 1.5 Ncm
Weightapprox. 45 g
Electrical connection6-pole MQS connector, code A, tinned contact according to drawing AMP-114-18063-126, index A1 (connector: AMP 1-967616-1)
OptionMeaning
Example: RSA-3201-214-614-521 = standard design, digital interface, 14 bits, CANopen with 1 position and 1 speed (one channel), 250 kBaud and 6-pole male AMP MQS connector.
1 · Mechanical version
3201Standard design
3202With Z-RSA-M01 lever mounted
2 · Interface
2Digital interface
3 · Resolution
1414 bits
4 · Bus interface
6CANopen
5 · Interface parameters
1One channel: 1x position, 1x speed
5One channel: 1x position, 1x speed, with 120 Ω bus termination
2Two channels: 2x position, 2x speed
6Two channels: 2x position, 2x speed, with 120 Ω termination
6. Transmission speed
11000 kBaud
2800 kBaud
3500 kBaud
4250 kBaud
5125 kBaud
750 kBaud
7 · Electrical connection
521AMP MQS 6-pole male connector
The code is formed using one option from each field, in the order shown in the example. Contact us and we will confirm the exact reference.
Novotechnik RSA-3200 CANopen Contactless Magnetic Angle Sensor
Dimensional drawing of the RSA-3200 CANopen Novotechnik contactless magnetic angle sensor

Other products

NESA Environmental Meters
0-1Vdc, 4-20mA, RS485/Modbus | 0-100% RH | Thin-film capacitive | 26 x 220 mm | 10-30Vdc | Weight < 80 g
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Metal housing Ø102 mm | Shaft Ø12 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (300 kHz optional)
NESA Environmental Meters
Pt100 + 0÷1Vdc, 4÷20mA, RS485 | -40 ÷ +80 °C / 0 ÷ 100 %Rh | Pt100 1/3DIN + Capacitive | Ø 26 x 220 mm | 10÷28Vdc | Weight < 100g
LVDT Manufacturer Logo Schreiber Messtechnik
Slot Sensor | 22mm Pitch | 20mm Stroke | 4-20mA, ±10V Outputs | IP66 Hermetic | Infinite Resolution | High Repeatability
Digital pressure gauge
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Ø80 mm control | 100 pulses/revolution with latching | NPN outputs and 26LS31 driver | 5 V or 15–24 V power supply | IP50 shaft side | Phoenix MS (IP00) axial terminals
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø6 f6 shaft | Up to 30 bits in 16384 revolutions | SSI or SSI with preset (S1, S4) | RS422/RS485 line driver | 10–30 V power supply | IP64 shaft (IP66 sealed) | 800 kHz step frequency
LVDT Manufacturer Logo Schreiber Messtechnik
Amplified LVDT | Range 5 to 20 mm | Stainless Steel Housing Ø 10 mm | 5V Power Supply | IP67 | PCD 20.0 mm | Analog Output 0-4V DC
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel pH reference electrode, epoxy body. 9m cable
Shopping Basket