B&C SZ145 pH Sensor
Combined glass/gel pH reference electrode, epoxy body. 9m cable
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, pH and Redox Probes
The B&C Electronics SZ145 pH sensor is a universal digital sensor with a 9m cable, compatible with all pH controllers on the market and suitable for all types of stable processes. It provides reliable measurements even at the extremes of the pH range.
This pH electrode allows for precise measurement at an extraordinary cost. Its bulb is constructed of extra-hard glass, while the body is made of epoxy for added protection.
It contains a potassium chloride (KCl) solution inside, which extends its useful life and keeps it in good condition. The sensor does not require additional electrolyte.
Specially designed for use in swimming pools and spas.
Properties
- Measuring range: 0 to 13 pH
- Temperature range: 0 to 80 °C
- Body material: Epoxy
- Maximum pressure: up to 8 bars
- Connector: 9m cable
- Dimensions: 110 mm in length and 12 mm in diameter
- Application: Measurement in swimming pools and spas
- Zero Point: pH 7
- Accuracy: ± 0.03 pH unit
- Response time: < 10 seconds (95% response)
- pH electrode solution: pH buffer with added chloride
- Reference type: Annular ceramic, sealed
- External reference electrode solution: Polysaccharide gel, 4M KCI with AgCI
Other products
Amplified LVDT | Range 5 to 20 mm | Stainless Steel Housing Ø 10 mm | 5V Power Supply | IP67 | PCD 20.0 mm | Analog Output 0-4V DC
Hollow Shaft Ø6-15mm | Weight 290g | Bearing Life 1.5×10^9 rev | Impact Resistance 50G | Operating Temperature 0-70°C | Maximum Frequency 100kHz | Standard Consumption 120mA | Protection IP65/IP66 | Output Push-Pull/Line Driver | Power Supply 5-30V
Stainless steel pinion | Anodized aluminum base | Weight 1800g | Radial load 4kg | Bearing life 1.5×10^9 revs | Impact resistance 50G | Temperature 0-70°C | Pulses/rev 1-10000 | Max frequency 60kHz | IP65 output
I/115 – Incremental Encoder Ø 115 mm, solid shaft Ø 11 mm, robust metal body, resolution up to 25,000 pp
Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
High Capacity Inductive Torque Transducer (20,000 … 30,000 Nm)
Transverse Inductive Measurement | 500 N·m | 21,000 RPM maximum | Strict PCD flange 84.0 mm | Overall resolution 0.02% | Ultra-low inertia 0.0017 kg·m²