Schreiber SM14 Multichannel Module
Schreiber SM14 Multichannel Module
- Manufacturer: Schreiber Messtechnik
- Category: Signal converters, Displacement, INSTRUMENTATION, SENSORS, LVDT Sensors
The Schreiber Messtechnik SM14 is a Eurocard designed to connect up to seven linear and/or angular displacement sensors (LVDT), offering precise measurement with an accuracy of 0.25% or 0.5%. Ideal for industrial, automation and testing applications, it stands out for its standard format, high precision and compatibility with sensors from the same line, allowing simultaneous and efficient monitoring of multiple points. The Schreiber multi-channel module supplies the transducers with a stabilized AC voltage and converts the measurement signal into a DC voltage or current proportional to the measured length or angle. The basic gain is preset, fine adjustment is made via potentiometers.
Properties
- Multi-channel capability: 3, 5 or 7 channels
- With zero point and gain adjustment
- IEC603/DIN41612 connector, type D, 32 pins
- Phoenix plug-in card block with connection terminals available as an accessory
- High precision: Offers a measurement accuracy of 0.25% or 0.5%, suitable for applications requiring high accuracy.
Optimize your processes with the precision and reliability of Guemisa Sensors and InstrumentationDiscover our wide range of measurement, control and automation solutions, designed to meet the most demanding needs of your industry.
📞 Contact us today ventas@guemisa.com to advise you on your project or visit our website www.guemisa.com and find the perfect equipment to take your productivity to the next level. The technology you need, at your fingertips!
Other products
Inductive Transducer | Limit 3,000 N·m | 16,000 RPM | PCD Flange 130.0 mm | Accuracy 0.02% | Inertia 0.0093 kg·m²
Absoluto, hilo Ø 0,9 mm | Carrera hasta 3 m | Resolución 0,1 o 1 mm | SSI, Gray o binario; preset S1/S4 | 10–30 V CC | IP64 (conectores IP65) | Linealidad ±0,05 % f.s.
13 or 16 tooth pinion | With integrated pinion preload | Linear resolution 0.001 to 1 mm | 1 to 10000 impedances/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 sealed)
Side Output | High Sensitivity 500mV/g | Frequency 0.5Hz-12kHz | Dynamic Range ±16g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Insulated Base | 2-pin Connector Mil-C-5015
Three-phase voltage monitoring relay. Overvoltage, undervoltage, and sequence
Passive Inductive | Range 5 to 20 mm | Stainless Steel Housing Ø 10 mm | Infinite Resolution | IP68 | PCD 20.0 mm | External Analog Output
Early lightning warning | −100 … +100 kV/m | 3 s response time | 3 alarm levels | Modbus RS-485 | 6061 aluminum, Ø78 × 105 mm
Output 1g or 10g RMS | Frequency 159.2 Hz | Speed 10 or 100 mm/s | Amplitude Accuracy ±2% | Frequency Accuracy ±1% | Sine Waveform | Power Supply 9V Battery | 2-pin MIL Connector | LED Indicator | ABS Housing
Rain gauge with a collection area of 1000 cm², measuring up to 300 mm/h of rain
RS232 – RS485 – RS232 Isolator-Repeater Converter