A/958SS Multi-Turn Absolute Encoder

Budget-friendly price Request a quote
Ø58 mm, servo, Ø6 f6 shaft | Up to 30 bits in 16384 revolutions | SSI or SSI with preset (S1, S4) | RS422/RS485 line driver | 10–30 V power supply | IP64 shaft (IP66 sealed) | 800 kHz step frequency

The ELCIS 958SS (A/958SS) is a 58 mm diameter, 30-bit, 16,384-turn SSI absolute multi-turn encoder with an RS422/RS485 line driver output stage and a clock frequency of 100 kHz to 1 MHz. For general industrial use, it is servo-mounted using front-mounted clamps or screws, and features a 6 mm diameter (10 mm diameter) stainless steel shaft (optional) that supports radial loads of 40 N and axial loads of 110 N. It offers standard IP64 or sealed IP66 protection, resistance to 30 G of impact and 10 G of vibration, and operation between -40 and +85 °C (with cable: -5…+70 °C).

The A/958SS is a multi-turn absolute encoder with optical readout via an IR photodiode array. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions. It transmits position via an SSI serial interface (RS422 line driver) with a clock frequency of 100 kHz to 1 MHz, in Gray code or binary code, and is available in preset (S1) and preset push-button (S4, with radial output only) variants.

Manufactured with a Ø58 mm aluminum body and a Ø6 f6 stainless steel shaft (Ø10 optional), it supports radial loads of 40 N and axial loads of 110 N. It features standard IP64 or sealed IP66 protection, withstands impacts of 30 G and vibrations of 10 G, and operates in a thermal range of -40 to +85 °C (with cable: -5 to +70 °C).

  • Maximum resolution of 30 bit in 16384 turns.
  • Serial interface SSI with line driver RS422 and watch 100 kHz a 1 MHz.
  • Variants with preset function (S1) or with a preset button (S4, (radial output only).
  • Temperature range of -40 a +85 °C with protection up to IP66.

Technical Frequently Asked Questions

What resolutions and lap times does the A/958SS offer?

It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.

What are the differences between the SSI interface options (SL, S1, and S4)?

The SL is the standard SSI interface. The S1 is the same as the SL, but with a preset function. The S4 is the same as the SL, but with a preset button, and is only available with a radial output.

What connectors and cables are available?

It is supplied with a 1 m cable with IP65 rating in axial (CAW) or radial (CRW) output, or with 12-pin circular connectors with IP65 rating in axial (PAL) or radial (PRL) configuration.

Properties

FeatureSpecification
Mechanics
Weight300 g
AxisØ6 f6 stainless steel (optional Ø10)
max radial/axial load.40 / 110 N
Exit stageLine driver (according to RS422 / RS485)
Electric
Exit-side protectionIP65 according to connection
Feeding10–30 V DC
Max. consumption.1 W (SL) · 1.5 W (S1)
LSB pitch frequency800 kHz
Exit codesGray, Binary
Max resolution.30 bit / 16384 laps
Output interfaceSSI (SL) · SSI with preset (S1 / S4)
Protection and environment
axle-side protectionIP64 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C (with wired output: -5…+70 °C)
ReferenceConfiguration
A/958SS12-12-06-G-S4-0-PRLA958SS121206GS40PRL4096 steps/rev. · revolutions: 4096 · standard Ø6 mm shaft · Gray · SSI + preset push button (radial only) · 12-pin radial connector · IP65
ELCIS A/958SS Multi-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/958SS multi-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 50…900 mm | Resolution < 0.01mm | M6 stem | 42VDC | IP55 | 10m/s
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Contactless: magnet in hollow shaft | Hollow shaft Ø4, 5, 6, 8 or 10 mm | Housing 45×45 mm | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP67 shaft, 30000 rpm
ATESTEO LOGO, manufacturer of torque sensors
60 · 70 · 80 · 100 · 120 kN·m | Clase 0,10 % | 8000 rpm | Rotor Ø418 mm | Taladros 369,0 mm | RS422, tensión, corriente, bus CAN
Dimetix_AG-1
Up to 100 m over natural surfaces and up to 500 m with reflector, typical accuracy of ±1 mm @2σ (±0.5 mm @1σ), and measurement frequency up to 100 Hz.
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Current output 4 … 20 mA | Ø 79 mm | 12-bit resolution | Spindle Ø 13 mm or Ø 10 mm | 12/24 VDC (8 … 34 VDC) | IP67 / IP69K | 60° to 360°, 1 or 2 channels
ATESTEO LOGO, manufacturer of torque sensors
200 N·m · 500 N·m · 1000 N·m · 2000 N·m · 3000 N·m · 4000 N·m · 5000 N·m · 10 kN·m | Clase 0,03 % | Rotor Ø107 a 230 mm | Taladros 84,0 a 196,0 mm | Puente de galgas sin amplificar (mV/V)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductive, contactless | CANopen DS-406 | Stroke 100 … 1000 mm | Resolution 1 or 5 µm | Linearity ≤ ±100 µm | 18 … 32 VDC | IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø44 mm, shaft Ø6 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP66 shaft (IP53 with low torque) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
DPF Sensors logo
Anemometer with pulse output, proportional to wind speed, industrial use
Shopping Basket