VE80 Electronic Steering Wheel

Budget-friendly price Request a quote
Incremental output | Ø80 mm control | 100 pulses/revolution with latching | NPN outputs and 26LS31 driver | 5 V or 15–24 V power supply | IP50 shaft side | Phoenix MS (IP00) axial terminals

The ELCIS VE80 is an electronic steering wheel with an 80 mm diameter metallic knob and 100 pulses per revolution with latching. Its output is via a terminal block.

The VE80 incorporates a metallized Ø80 mm control. It delivers 100 pulses per revolution as standard, with mechanical interlocking at each step.

It offers standard NPN electronics and a 26LS31 driver with 5 VDC or 15 to 24 VDC power supply. IP50 protection on the shaft side and a rotational life of at least 1,000,000 hours at 200 rpm.

  • Resolution of 100 pulses per turn with interlocking by notches at each step.
  • Metallic control Ø80 mm.
  • Nutrition 5 Vcc or of 15 to 24 VDC with Phoenix MS terminal box.
  • Rotating lifespan ≥ 1,000,000 hours a 200 rpm and degree of protection IP50 axis side.

Technical Frequently Asked Questions

What resolution and control diameter does the VE80 have?

It has an 80 mm diameter control and offers 100 pulses per revolution with mechanical interlocking by notches at each step.

What electronic outputs and voltages does it support?

It accepts standard NPN stages and a 26LS31 (N) driver. Supply voltages are 5 V ±5 % or 15–24 V.

What IP connectivity and protection options does it include?

It offers IP50 protection on the shaft side, and IP00 rating on the Phoenix MS axial terminal block.

Properties

FeatureSpecification
Mechanics
HousingAnodized aluminum
CoverPlastic
Weight280 g
Starting torque0,12 Nm
Electric
Exit-side protectionAccording to connection: IP00
Feeding5 V ±5%, 15–24 V
Max. consumption.80 mA standard · 160 mA line driver
Impulses per lap100 standard (with detent notches at each step)
Protection and environment
axle-side protectionIP50
Rotational life at 200 rpm≥ 1,000,000 h
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +60 °C
Storage Temp.-30 … +85 °C
Other features
Remote control and graduated discMetallic (80 mm diameter handle)
ReferenceConfiguration
VE80-100-5-BN-MSVE801005BNMS100 pulses/revolution · 5 V ±5 % · bidirectional (B) · Driver 26LS31 · Phoenix terminal box · IP00 (axial output) · axial output
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS VE80 electronic steering wheel
Dimensional drawing of the ELCIS VE80 electronic steering wheel

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø15 | Ø59, tangential anti-rotation pin | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Section 20×48.5 mm | Stroke 100–2350 mm (50 steps) | Resolution 10 or 5 µm | Output VB or VD (line driver) | Power supply 5 V ±5 % | IP53 with neoprene protections | Max. speed 120 m/min (10 µm)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø68, spindle Ø6 h7 | Up to 2048 steps (11 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 spindle (IP66 sealed) | Gray, Binary, Excess or BCD
Monitran-Logo
Industrial eddy current probe | Linear range 0 – 12 mm | Sensitivity 1.4 mV/µm nominal | DC to 10 kHz | M30 thread, Ø25 mm | -30 °C to 180 °C (probe) | Power supply -24VDC @ 30mA
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
IO-Link | Ø 36 mm | 16 bits per revolution | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 24 VDC (16 … 30 VDC) | IP67 / IP69K | Measuring range: 44 revolutions (15840°)
ATESTEO LOGO, manufacturer of torque sensors
Inductive (Dual-Frequency) | 500 N·m – 4,000 N·m | Up to 40,000 RPM | PCD Flange 105.0 mm
ATESTEO LOGO, manufacturer of torque sensors
Rotary Telemetry | 5-20 N·m | 25,000 RPM | PCD Flange 63.0 mm | Inertia 0.00030 kg·m²
Monitran-Logo
1000 mV/g ±5% | Constant current 0.5 to 8 mA | 5 Hz to 12 kHz ±10% | ±10 g | 11 g | -55 to 120 °C | 16 x 14 x 14 mm cube | BNC, IP65
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Metal housing Ø86 mm | Standard B10 flange (Ø115) | Duplicate aluminum cover | Ø11 h7 stainless steel shaft | 1 to 90000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | IP66 shaft (IP67 sealed)
Shopping Basket