BAROLI 2

Differential pressure transducer for liquids

Safety tilt controller for platforms.

Ø65 mm, Ø10 h7 spindle | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP65 spindle (IP66 sealed) | Optional spindle Ø6, 8, 9.52, 11 or 12

B10 flange mounting Ø115 mm | Housing Ø96 mm, shaft Ø11 h7 | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 with Z option) | Up to 6000 rpm (3000 with Z)

Hollow through shaft H7 up to Ø15 | Ø59 | Up to 8192 steps (13 bits) | Parallel NPN open collector | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP65 sealed) | Gray code only

Analog electronic module for LVDT sensor

Tilt sensor for platform control, on 1 or 2 axes, programmable alarm range, range +-15º, accuracy 0.1º, 1Amp contact, NC or NO, 24 VDC power supply, IP67

B10 flange Ø115, shaft Ø11 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP66 shaft (IP67 sealed) | Gray, Binary, Excess or BCD

Hollow shaft Ø6–12 mm | Internal coupling | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6

High-precision cup anemometer for wind speed measurement. IEC 61400-12-1 compliant with 0-2V, 4-20mA, frequency or RS485 Modbus outputs.