UTAI Indoor Temperature and Humidity Thermohygrometer

Budget-friendly price Request a quote
Pt100 + 0÷1Vdc, 4÷20mA, RS485 | -40 ÷ +80 °C / 0 ÷ 100 %Rh | Pt100 1/3DIN + Capacitive | Ø 26 x 220 mm | 10÷28Vdc | Weight < 100g

The NESA UTAI is a combined indoor air temperature and relative humidity thermohygrometer with a 1/3DIN Pt100 platinum element (-40 ÷ +80 °C) and a thin-film capacitive transducer (0 ÷ 100 %Rh), housed in an inert and antistatic plastic cylindrical body (Ø 26 x 220 mm).

It offers a resolution of 0.015 °C in temperature and 0.1% in relative humidity, calibrated by comparison with a certified SIT standard instrument and delivered with a calibration report, and is manufactured in three output versions: UTAI-N (T: 4-wire Pt100; RH: 0÷1Vdc), UTAI-B (T: 4÷20mA; RH: 4÷20mA) and UTAI-C (RS485 / ModBus).

Key points

  • Platinum resistance thermometer 1/3DIN Pt100 (±0.1 °C @ 0 °C; resolution 0.015 °C) and thin-film capacitive element (±2 % fs; resolution 0.1%)
  • Measurement range of -40 ÷ +80 °C in temperature and 0 ÷ 100 %Rh in relative humidity
  • Cylindrical body made of inert and antistatic plastic material, Ø 26 x 220 mm and weighing less than 100 g
  • Available outputs: Pt100 + 0÷1Vdc (UTAI-N), 4÷20mA for T and RH (UTAI-B) and RS485 / ModBus (UTAI-C)
  • 10÷28Vdc power supply and consumption less than 0.5 W (UTAI-B)

Technical Frequently Asked Questions

What output signals does the UTAI indoor thermo-hygrometer offer?

It is supplied in three versions: UTAI-N (Pt100 1/3DIN 4-wire temperature and 0÷1Vdc humidity), UTAI-B (two 4÷20mA outputs for temperature and humidity) and UTAI-C (RS485 / ModBus digital output).

How do I order the UTAI thermo-hygrometer?

The order code indicates the sensor (UTAI), the output (N, B, or C), the cable length (05 = CS05 of 5 m, 10 = CS10 of 10 m, xx = CSxx, length in meters to be specified), and the wall-mounting bracket for stylus sensors (SUPP). The model references are UTAI-N, UTAI-B, and UTAI-C.

What are the operating conditions of the NESA UTAI?

It operates between -40 and +80 °C with a 10÷28Vdc power supply, consumes less than 0.5 W (in the UTAI-B version) and weighs less than 100 g.

Properties

FeatureSpecification
Measurement and sensitive element
Measured magnitudesIndoor temperature (T) and relative humidity (RH)
Temperature measurement range-40 to +80 °C
Humidity measurement range0 ÷ 100 %Rh
Temperature-sensitive elementPlatinum resistance thermometer 1/3DIN Pt100 (100 Ω @ 0 °C)
Moisture-sensitive elementThin-film capacitive
PrecisionTemperature: DIN 43760 1/3DIN (±0.1 °C @ 0 °C) · Humidity: ±2 % fs.
ResolutionTemperature: 0.015 °C · Humidity: 0.1%
Response timeTemperature: < 60 s · Humidity: < 100 s (10÷80 %RH)
Output signals and connections
Version N (UTAI-N)Temperature: Pt100 1/3DIN 4-wire · Humidity: 0÷1Vdc
Version B (UTAI-B)Temperature: 4÷20mA · Humidity: 4÷20mA
Version C (UTAI-C)Temperature and humidity: RS485 / ModBus
Power supply, environment, and mechanical data
Feeding10÷28Vdc
Consumption< 0.5 W (UTAI-B)
Operating conditions-40 to +80 °C
Construction materialInert and antistatic plastic material
DimensionsØ 26 mm; length 220 mm (dimensions for version C may vary)
Weight< 100 g
ReferenceConfiguration
UTAI-BUTAIBModel: UTAI · Temperature (T) Output: 4÷20mA · Humidity (RH) Output: 4÷20mA
UTAI-CUTAIModel: UTAI · Temperature (T) Output: RS485 / ModBus · Humidity (RH) Output: RS485 / ModBus
UTAI-NUTAINModel: UTAI · Temperature (T) Output: Pt100 1/3DIN 4-wire · Humidity (RH) Output: 0÷1Vdc
NESA UTAI Indoor Temperature and Humidity Thermohygrometer
Dimensional drawing of the NESA UTAI indoor thermo-hygrometer

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6, 8, 9.52 or 10 mm | Housing Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 sealed Z) | Star-shaped, compensates ±3 mm axial
Dimetix_AG-1
It measures up to ~100 m over natural surfaces and up to 150 m with a reflector, with a typical accuracy of ±3 mm @2σ and a frequency of up to 100 Hz. It is geared towards position and level applications where ±1 mm accuracy is not required.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø38 mm | Solid shaft Ø6.35 h7 | 1–2540 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange, Ø11 h7 shaft | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP64 shaft (IP66 sealed) | Optional shaft Ø8, 9.52, 10, 12 or 12.5
ATESTEO LOGO, manufacturer of torque sensors
Inductive PCM Transmission | 60,000 N·m | 8,000 RPM | PCD Flange 369.0 mm | Inertia 1.6378 kg·m²
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Potentiometric output | Stroke 50 … 750 mm | Linearity ±0.04 … ±0.2 % | Resolution < 0.01 mm | 42 V max. | IP67 | M12 connector or cable
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Metal housing Ø50 mm | Stainless steel shaft Ø8 mm | 10 to 2500 pulses/revolution | NPN, push-pull or line driver | 5 V ±5 % or 12–24 V | IP52 shaft, IP65 output | Max. frequency 180 kHz
DPF Sensors logo
Soil moisture sensor
DPF Sensors logo
Combined wind speed and direction sensor
Shopping Basket