Schreiber SM27 Series Amplified LVDT Sensor Ø 10 mm PCD 20.0 mm

Budget-friendly price Request a quote
Amplified LVDT | Range 5 to 20 mm | Stainless Steel Housing Ø 10 mm | 5V Power Supply | IP67 | PCD 20.0 mm | Analog Output 0-4V DC

The Schreiber SM27 miniature amplified LVDT sensor belongs to the family of LVDT with integrated electronics. It integrates an ASIC oscillator/demodulator in a 10 mm diameter stainless steel cylindrical body. Power supply: 5 V DC. Continuous analog output of 0 to 4 V proportional to the displacement of the NiFe alloy core (SM277 increasing, SM278 decreasing). No external conditioners required. Useful measurement range: 5, 10, 15, and 20 mm.

The SM27 uses the same flanges as the passive SM21 version, with a 20.0 mm PCD pattern (SM906 flange). The 0-4 V signal is applied directly to data acquisition (DAQ) cards or PLCs. Applications: CNC machinery and space-constrained test benches. Linearity: < 0.5% (standard) and < 0.25%. Protection: IP66 (connector format) and IP67 (radial injection-molded connector). Thermal drift: < 0.01%/°C (-20°C to +85°C). Shock resistance: 250 g SRS (20 Hz to 2000 Hz). More linear position sensors. Technical consultation.

Properties

Engineering SpecificationTechnical Value SM27
Measurement principleInductive LVDT (Integrated ASIC Electronics)
External diameter10.0 mm (Micro-encapsulated)
Pitch Circle Diameter (PCD)Metric clamping at 20.0 mm (Using SM906 flange)
Useful measuring range5 mm | 10 mm | 15 mm | 20 mm
Deviation from linearity< 0.5% (Standard) / < 0.25% (Advanced Adjustment)
Excitatory feeding5V DC (Short circuit, polarity protection)
Analog output signal0 .. 4V DC (SM277 rising / SM278 falling)
Level of environmental protectionIP66 (Connector format) / IP67 (Radial injection molded connector)
Temperature drift< 0.01% / ºC (-20 ºC to +85 ºC thermal)
Dynamic crash profile250 g SRS (Spectrum between 20Hz and 2000Hz)
Building materialAnti-corrosive NiFe/Inox outer casing
Required peripheral electronicsNONE (Direct signal transferable to DAQ/PLC)
Miniature Schreiber SM27 LVDT sensor with integrated electronics for linear displacement measurement
Schreiber SM27B miniature LVDT sensor for industrial linear displacement measurement

Other products

Monitran-Logo
ISO 10816-3 Standard | Color TFT Display | 100-Record Memory | Bearing Analysis | USB/CSV Export | >18h Li-ion Battery | Audio/Headphone Output | Low-Pass Filters | RMS and Peak Measurement | Industrial Rubber Housing
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø10 h8 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø63 mm, shaft Ø9.52 h7 | 100/127 to 2000/2540 pulses/revolution | Imperial or metric up/down counting | 26LS31 driver output | 5 V ±5 % power supply | IP65 shaft (IP66 sealed) | 10-pin connector
Monitran-Logo
Top Input | Sensitivity 100mV/g | Lightweight Design (45g) | Frequency 2Hz-10kHz | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | 3-pin Connector 62GB
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø14 h6, housing Ø170 mm | Centering Ø140 h6 | 18000–90000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft (IP53 under torque) | 100 kHz (1000 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Metal housing Ø102 mm | Shaft Ø12 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (300 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø4, 6, 8, 9.52 or 10 mm H7 | Flange Ø59.5 mm | 1 to 2540 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP53 shaft side | Elastic, electrical zero alignment
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
pH probe for immersion in PVC tube. Length 720 mm.
DPF Sensors logo
Universal tensile-compression load cell, from 15 to 5000 kg. 2 mv/v.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Wire diameter 0.51 mm | Stroke 500, 750, 1000 or 1250 mm | Potentiometric output (divider) | Potentiometer 1 kΩ | Linearity ±0.25 % fs | IP50 potentiometer (IP54 mechanical) | Connection length 1 to 5 m
Shopping Basket