URI Indoor Relative Humidity Sensor

Budget-friendly price Request a quote
0-1Vdc, 4-20mA, RS485/Modbus | 0-100% RH | Thin-film capacitive | 26 x 220 mm | 10-30Vdc | Weight < 80 g

The NESA URI is an indoor relative humidity sensor with a thin-film capacitive transducer, a typical measurement range of 0 ÷ 100 %Rh and a plastic body (26 x 220 mm).

It features a resolution of 0.1%, accuracy of ±2% fs, and a response time of less than 90 s (10–80% RH). It is supplied with a calibration report and a 5 m cable in versions with 0–1 Vdc (URI-A), 4–20 mA (URI-B), or RS485/Modbus (URI-C) output.

Key points

  • Thin-film capacitive transducer with ±2% fs accuracy and 0.1% resolution
  • Measurement range of 0 ÷ 100 %RH and response time less than 90 s (10÷80 %RH)
  • Body made of plastic material (26 x 220 mm; weight less than 80 g)
  • Available outputs with 5m cable: 0÷1Vdc (URI-A), 4÷20mA (URI-B) and RS485/Modbus (URI-C)
  • 10÷30Vdc power supply with consumption less than 0.1 W

Technical Frequently Asked Questions

What output signals does the URI indoor humidity sensor provide?

It is available in three versions with a 5m cable: URI-A (0÷1Vdc voltage output), URI-B (4÷20mA current output) and URI-C (RS485/Modbus output).

How do I order the URI indoor relative humidity sensor?

The order code combines the sensor (URI), the output (A, B, or C), and the sensor-datalogger cable (05 = CS05, 5 m; 10 = CS10, 10 m; xx* = CSxx, length in meters to be specified in the order), and the anodized aluminum SSM wall mount for ø25 mm sensors, positioned approximately 12 cm from the wall. Manufacturer example: URI A 10 SSM. Available references are URI-A, URI-B, and URI-C.

Under what environmental conditions does the URI sensor operate?

It operates between -40 and +60 °C with a 10÷30Vdc power supply, consumes less than 0.1 W and weighs less than 80 g.

Properties

FeatureSpecification
Measurement and sensitive element
Measured magnitudeRelative humidity of indoor air
Typical measurement range0 ÷ 100 %Rh
Transducer typeThin-film capacitive
Precision±2 % fs.
Resolution0,1 %
Response time< 90 s (10÷80 %RH)
Output signals and connections
Version A (URI-A)0÷1Vdc, with 5 m cable
Version B (URI-B)4÷20mA, with 5m cable
Version C (URI-C)RS485/Modbus, with 5m cable
Power supply, environment, and mechanical data
Feeding10÷30Vdc
Consumption< 0.1 W
Operating conditions-40 to +60 °C
Construction materialPlastic material
Dimensions26 mm; length 220 mm
Weight< 80 g
ReferenceConfiguration
URI-AURIAModel: URI · Body: Plastic, 26 x 220 mm · Output signal and supply: 0÷1Vdc, with 5 m cable
URI-BURIBModel: URI · Body: Plastic, 26 x 220 mm · Output signal and supply: 4÷20mA, with 5 m cable
URI-CURICModel: URI · Body: Plastic, 26 x 220 mm · Output signal and supply: RS485/Modbus, with 5 m cable
NESA URI Indoor Relative Humidity Sensor
Dimensional drawing and wire numbering of the NESA URI indoor relative humidity sensor

Other products

ATESTEO LOGO, manufacturer of torque sensors
Type K Thermocouple | -200…1200 °C | 1000 Vrms Insulation | 50 Hz CAN Sampling | IP20/IP66
NESA Environmental Meters
2 x 4÷20mA, RS485/Modbus | 0 ÷ 90 m/s · 0 ÷ 360° | 4 ultrasonic cells | 162 x 320mm | 10÷30Vdc | IP65
ATESTEO LOGO, manufacturer of torque sensors
Rotary Telemetry | 5-20 N·m | 25,000 RPM | PCD Flange 63.0 mm | Inertia 0.00030 kg·m²
DPF Sensors logo
Digital pressure transducer
DPF Sensors logo
MP633 PRESSURE
ATESTEO LOGO, manufacturer of torque sensors
Inductive Telemetry | 20,000 N·m | Rotational Limit 12,500 RPM | PCD Flange 218.0 mm | Inertia 0.1485 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø10 | Ø59, star coupling | Up to 2048 steps (11 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
DPF Sensors logo
Load cells equivalent to TLC-6L and NLC-24L UH34-2.4-0
FUEL FLOW METERS
Shopping Basket