ATEX/IECEx Monitran Vibration Sensors
Monitran vibration sensors are ATEX and IECEx certified for intrinsic safety (Ex ia), suitable for areas with explosive gas and dust atmospheres (Group II) and for mining (Group I). Each reference links to its data sheet, including full markings, certification, and technical specifications in Spanish. Guemisa is an official Monitran distributor in Spain.
How to use this selector
- Choose where you will install it: click on the diagram corresponding to your installation zone (gas: zone 0, 1, or 2; dust: zone 20, 21, or 22; firedamp mining: Group I). The table shows only the products that can be installed in that zone.
- Refine the settings with the filters: atmosphere, zone, temperature class (e.g., T4 or T6), and outlet type. Press a filter again to remove it.
- If you already know the reference, type it into the search engine, with or without hyphens (for example, 2287I-2P).
- Compare: The table shows the ATEX/IECEx marking, zones, ambient temperature, and protection. Click on a column header to sort it.
- Open the reference: your record has the complete marking, the certificate, the entity parameters, the intrinsic safety barrier and the technical sheet in Spanish.
- «Download table (CSV)» saves the references you are viewing, so you can open them in Excel.
An intrinsically safe device is always installed with its barrier; the data sheet for each sensor indicates which one.
- Ma: The equipment can continue to operate with firedamp present. Mb: It disconnects if firedamp appears.
| Technical specifications | |||||||
|---|---|---|---|---|---|---|---|
| MTN/1100I | IEPE Accelerometer | 2-pin MS connector (top entry) | Ex ia IIC T4 Ga Ex ia IIIC T135 °C Da Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP67 | PDF DS0202.3 |
| MTN/1100IS | IEPE Accelerometer | 2-pin MS connector (side entry) | Ex II 1GD T135 °C Ex ia IIC T4 Ex II 1GD T85 °C Ex ia IIC T6 | 0, 1, 2 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP67 | PDF DS0204.2 |
| MTN/1100ISC | IEPE Accelerometer | Integral ETFE cable with stainless steel overbraid (side entry) | Ex II 1GD T135 °C Ex ia IIC T4 Ex II 1GD T85 °C Ex ia IIC T6 | 0, 1, 2 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP67 | PDF DS0205.2 |
| MTN/1100IW | IEPE Accelerometer | Integral polyurethane cable with additional PTFE sheath (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP68 | PDF DS0207.3 |
| MTN/1100ISW | IEPE Accelerometer | Integral polyurethane cable with additional PTFE sheath (side entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP68 | PDF DS0211.3 |
| MTN/1185IC | 4-20 mA velocity transducer | Integrated ETFE cable with stainless steel braid (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0228.6 |
| MTN/1185IW | 4-20 mA velocity transducer | Integrated polyurethane cable with additional PTFE sheath (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP68 | PDF DS0231.5 |
| MTN/1187IC | 4-20 mA Accelerometer | Integrated ETFE cable with stainless steel braid (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0235.5 |
| MTN/1187IW | 4-20 mA Accelerometer | Integrated polyurethane cable with additional PTFE sheath (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP68 | PDF DS0237.5 |
| MTN/2200I | IEPE Accelerometer | C5015 2-pin connector, military style (top entry) | Ex II 1GD T135 °C Ex ia IIC T4 Ex iaD 20 T135 °C Ex II 1GD T85 °C Ex ia IIC T6 Ex iaD 20 T85 °C | 0, 1, 2 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP67 | PDF DS0242.2 |
| MTN/2200I-4P | IEPE Accelerometer | M12 4-pin connector (top entry) | Ex II 1GD T135 °C Ex ia IIC T4 Ex iaD 20 T135 °C Ex II 1GD T85 °C Ex ia IIC T6 Ex iaD 20 T85 °C | 0, 1, 2 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP67 | PDF DS0244.3 |
| MTN/2200IC | IEPE Accelerometer | ETFE integral cable with stainless steel overbraiding, 5 m standard (top entry) | Ex II 1GD T135 °C Ex ia IIC T4 Ex iaD 20 T135 °C Ex II 1GD T85 °C Ex ia IIC T6 Ex iaD 20 T85 °C | 0, 1, 2 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP67 | PDF DS0219.3 |
| MTN/2200IS-4P | IEPE Accelerometer | M12 4-pin connector (side entry) | Ex II 1GD T135 °C Ex ia IIC T4 Ex II 1GD T85 °C Ex ia IIC T6 | 0, 1, 2 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP67 | PDF DS0267.2 |
| MTN/2200ISC | IEPE Accelerometer | Integral ETFE cable with stainless steel overbraid (side entry) | Ex II 1GD T135 °C Ex ia IIC T4 Ex II 1GD T85 °C Ex ia IIC T6 | 0, 1, 2 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP67 | PDF DS0269.3 |
| MTN/2200ISW | IEPE Accelerometer | Heavy-duty integral polyurethane cable (side entry, low profile) | Ex II 1GD T135 °C Ex ia IIC T4 Ex II 1GD T85 °C Ex ia IIC T6 | 0, 1, 2 | −55 °C ≤ Ta ≤ +115 °C (T4) · −55 °C ≤ Ta ≤ +65 °C (T6) | IP68 | PDF DS0276.3 |
| MTN/2200IW | IEPE Accelerometer | Integral polyurethane cable with additional PTFE sheath (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP68 | PDF DS0305.2 |
| MTN/2285I-2P | 4-20 mA velocity transducer | 2-pin MS connector (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0262.5 |
| MTN/2285I-4P | 4-20 mA velocity transducer | M12 4-pin connector (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0263.6 |
| MTN/2285IC | 4-20 mA velocity transducer | Integrated ETFE cable with stainless steel braid (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0250.5 |
| MTN/2285IT-4P | 4-20 mA velocity transducer | M12 4-pin connector (top entry) | Ex II 1GD T85 °C Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +45 °C | IP67 | PDF DS0286.4 |
| MTN/2285ITC | 4-20 mA velocity transducer | Integrated ETFE cable with stainless steel braid (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +45 °C | IP67 | PDF DS0285.5 |
| MTN/2285IW | 4-20 mA velocity transducer | Integrated polyurethane cable with additional PTFE sheath (top entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP68 | PDF DS0265.6 |
| MTN/2285IS-2P | 4-20 mA velocity transducer | 2-pin MS connector (side entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0308.4 |
| MTN/2285IS-4P | 4-20 mA velocity transducer | M12 4-pin connector (side entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0307.4 |
| MTN/2285ISC | 4-20 mA velocity transducer | Integrated ETFE cable with stainless steel braid (side entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0312.4 |
| MTN/2285ISW | 4-20 mA velocity transducer | Integrated polyurethane cable (side entry) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | PDF DS0481.4 | |
| MTN/2287I-2P | 4-20 mA Accelerometer | 2-pin MS connector | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS301.4 |
| MTN/2287I-4P | 4-20 mA Accelerometer | 4-pin M12 connector | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS302.4 |
| MTN/2287IC | 4-20 mA Accelerometer | Integrated ETFE cable with stainless steel braid | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP67 | PDF DS0298.4 |
| MTN/2287IT-4P | 4-20 mA Accelerometer | 4-pin M12 connector | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +45 °C | IP67 | PDF DS0296.4 |
| MTN/2287IW | 4-20 mA Accelerometer | Integrated polyurethane cable with additional PTFE sheath (length to be specified in the order) | Ex ia IIC T6 Ga Ex ia IIIC T85 °C Da | 0, 1, 2, 20, 21, 22 | −55 °C ≤ Ta ≤ +65 °C | IP68 | PDF DS0304.4 |
| MTN/M1187IC | 4-20 mA Accelerometer | Integrated ETFE cable with stainless steel braid | Ex ia I Ma | mining | −55 °C ≤ Ta ≤ +115 °C | IP67 | PDF DS0238.5 |
| MTN/M2200I | IEPE Accelerometer | 2-pin MS connector (military style C5015) | Ex ia I Ma | mining | −55 °C ≤ Ta ≤ +115 °C | IP67 | PDF DS0243.3 |
| MTN/M2200IC | IEPE Accelerometer | Integrated ETFE cable with stainless steel braid | Ex ia I Ma | mining | −55 °C ≤ Ta ≤ +115 °C | IP67 | PDF DS0261.4 |
| MTN/M2200IS | IEPE Accelerometer | 2-pin MS connector (military style C5015) | Ex ia I Ma | mining | −55 °C ≤ Ta ≤ +115 °C | IP67 | PDF DS0268.3 |
| MTN/M2200ISC | IEPE Accelerometer | Integrated ETFE cable with stainless steel braid | Ex ia I Ma | mining | −55 °C ≤ Ta ≤ +115 °C | IP67 | PDF DS0270.3 |
| MTN/M2285IC | 4-20 mA velocity transducer | Integrated ETFE cable with stainless steel braid | Ex ia I Ma | mining | −55 °C ≤ Ta ≤ +115 °C | IP67 | PDF DS0251.5 |
| MTN/M2287IC | 4-20 mA Accelerometer | Integral ETFE cable with stainless steel overbraid | Ex ia I Ma | mining | −55 °C ≤ Ta ≤ +115 °C | IP67 | PDF DS0300.4 |
No single reference meets all the filters. Remove some to see more.
Monitran ATEX order references
88 order references from 10 series. Each reference links to its corresponding line in the data sheet, with its configuration.
IEPE ATEX Accelerometer Monitran MTN/1100 (13)
| Reference | Configuration |
|---|---|
| MTN/1100I-xx MTN1100IXX | Variant: 1100I · Top Input · Connection: 2-pin MS connector (C5015, military style) · Mounting: ¼" UNF female · xx = optional sensitivity in mV/g: 10, 30, 50, 100 or 500 |
| MTN/1100IQ-xx MTN1100IQXX | Variant: 1100I · Top input · Connection: 2-pin MS connector (C5015, military style) · Mounting: Female Q/F quick-release base · xx = optional sensitivity in mV/g: 10, 30, 50, 100 or 500 |
| MTN/1100IS-xx MTN1100ISXX | Variant: 1100IS · Side Entry · Connection: 2-pin MS connector (C5015, military style) · Mounting: ¼"-28 UNF × 33 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/1100ISM6-xx MTN1100ISM6XX | Variant: 1100IS · Side entry · Connection: 2-pin MS connector (C5015, military style) · Mounting: M6 × 35 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/1100ISM8-xx MTN1100ISM8XX | Variant: 1100IS · Side entry · Connection: 2-pin MS connector (C5015, military style) · Mounting: M8 × 28 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/1100ISC-xx MTN1100ISCXX | Variant: 1100ISC · Side entry · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: ¼"-28 UNF × 33 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/1100ISCM6-xx MTN1100ISCM6XX | Variant: 1100ISC · Side entry · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: M6 × 35 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/1100ISCM8-xx MTN1100ISCM8XX | Variant: 1100ISC · Side entry · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: M8 × 28 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/1100IW-xx MTN1100IWXX | Variant: 1100IW · Top entry · Connection: Heavy-duty integral polyurethane cable, length to be specified on order, with additional PTFE sheath · Mounting: ¼" UNF female · Submersible to 5 m (0.5 bar) · xx = optional sensitivity in mV/g: 10, 25, 30 or 500 |
| MTN/1100IWQ-xx MTN1100IWQXX | Variant: 1100IW · Top entry · Connection: Heavy-duty integral polyurethane cable, length to be specified on order, with additional PTFE sheath · Mounting: Female Q/F quick-release base · Submersible to 5 m (0.5 bar) · xx = optional sensitivity in mV/g: 10, 25, 30 or 500 |
| MTN/1100ISW-xx MTN1100ISWXX | Variant: 1100ISW · Side entry · Connection: Heavy-duty integral polyurethane cable, length to be specified on order, with additional PTFE sheath · Mounting: ¼"-28 UNF × 33 mm bolt · Submersible to 5 m (0.5 bar) · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/1100ISWM6-xx MTN1100ISWM6XX | Variant: 1100ISW · Side entry · Connection: Heavy-duty integral polyurethane cable, length to be specified on order, with additional PTFE sheath · Mounting: M6 × 35 mm bolt · Submersible to 5 m (0.5 bar) · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/1100ISWM8-xx MTN1100ISWM8XX | Variant: 1100ISW · Side entry · Connection: Heavy-duty integral polyurethane cable, length to be specified on order, with additional PTFE sheath · Mounting: M8 × 28 mm bolt · Submersible to 5 m (0.5 bar) · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
ATEX 4-20 mA Speed Transducer Monitran MTN/1185 (4)
| Reference | Configuration |
|---|---|
| MTN/1185IC-xx MTN1185ICXX | Variant: 1185IC · Top entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼" UNF female · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/1185ICQ-xx MTN1185ICQXX | Variant: 1185IC · Top entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: Female Q/F quick-release base · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/1185IW-xx MTN1185IWXX | Variant: 1185IW · Top entry · Submersible to 5 m (0.5 bar), IP68 · Connection: Integrated polyurethane cable with additional PTFE sheath · Mounting: ¼" UNF female · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/1185IWQ-xx MTN1185IWQXX | Variant: 1185IW · Top entry · Submersible to 5 m (0.5 bar), IP68 · Connection: Integrated polyurethane cable with additional PTFE sheath · Mounting: Female Q/F quick-release base · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
ATEX accelerometer 4-20 mA Monitran MTN/1187 (4)
| Reference | Configuration |
|---|---|
| MTN/1187IC-xx MTN1187ICXX | Variant: 1187IC · Top entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼" UNF female · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/1187ICQ-xx MTN1187ICQXX | Variant: 1187IC · Top entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: Female Q/F quick-release base · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/1187IW-xx MTN1187IWXX | Variant: 1187IW · Top entry · Submersible to 5 m (0.5 bar), IP68 · Connection: Integrated polyurethane cable with additional PTFE sheath · Mounting: ¼" UNF female · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/1187IWQ-xx MTN1187IWQXX | Variant: 1187IW · Top entry · Submersible to 5 m (0.5 bar), IP68 · Connection: Integrated polyurethane cable with additional PTFE sheath · Mounting: Female Q/F quick-release base · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
IEPE ATEX Monitran MTN/2200 accelerometer (17)
| Reference | Configuration |
|---|---|
| MTN/2200I-xx MTN2200IXX | Variant: 2200I · Top Input · Connection: C5015 2-pin connector (military style) · Mounting: ¼" UNF female · xx = optional sensitivity in mV/g: 10, 30, 50, 500 or 1000 |
| MTN/2200IQ-xx MTN2200IQXX | Variant: 2200I · Top input · Connection: C5015 2-pin connector (military style) · Mounting: Female Q/F quick-release base · xx = optional sensitivity in mV/g: 10, 30, 50, 500 or 1000 |
| MTN/2200I-4P-xx MTN2200I4PXX | Variant: 2200I-4P · Top Input · Connection: 4-pin M12 connector · Mounting: ¼" UNF female · xx = optional sensitivity in mV/g: 10, 30, 50, 500 or 1000 |
| MTN/2200IQ-4P-xx MTN2200IQ4PXX | Variant: 2200I-4P · Top input · Connection: 4-pin M12 connector · Mounting: Female Q/F quick-release base · xx = optional sensitivity in mV/g: 10, 30, 50, 500 or 1000 |
| MTN/2200IC-xx MTN2200ICXX | Variant: 2200IC · Top Entry · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: ¼" UNF female · xx = optional sensitivity in mV/g: 10, 20, 25, 30, 50 or 500 |
| MTN/2200ICQ-xx MTN2200ICQXX | Variant: 2200IC · Top entry · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: Female Q/F quick-release base · xx = optional sensitivity in mV/g: 10, 20, 25, 30, 50 or 500 |
| MTN/2200IS-4P-xx MTN2200IS4PXX | Variant: 2200IS-4P · Side entry · Connection: 4-pin M12 connector · Mounting: ¼"-28 UNF × 33 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200ISM6-4P-xx MTN2200ISM64PXX | Variant: 2200IS-4P · Side entry · Connection: 4-pin M12 connector · Mounting: M6 × 35 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200ISM8-4P-xx MTN2200ISM84PXX | Variant: 2200IS-4P · Side entry · Connection: 4-pin M12 connector · Mounting: M8 × 28 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200ISC-xx MTN2200ISCXX | Variant: 2200ISC · Side entry · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: ¼"-28 UNF × 33 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200ISCM6-xx MTN2200ISCM6XX | Variant: 2200ISC · Side entry · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: M6 × 35 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200ISCM8-xx MTN2200ISCM8XX | Variant: 2200ISC · Side entry · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: M8 × 28 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200ISW-xx MTN2200ISWXX | Variant: 2200ISW · Side entry · Connection: Heavy-duty integral polyurethane cable · Mounting: ¼"-28 UNF × 33 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200ISWM6-xx MTN2200ISWM6XX | Variant: 2200ISW · Side entry · Connection: Heavy-duty integral polyurethane cable · Mounting: M6 × 35 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200ISWM8-xx MTN2200ISWM8XX | Variant: 2200ISW · Side entry · Connection: Heavy-duty integral polyurethane cable · Mounting: M8 × 28 mm bolt · xx = optional sensitivity in mV/g (±10%): 10, 25, 30 or 50 |
| MTN/2200IW-xx MTN2200IWXX | Variant: 2200IW · Top entry · Connection: Heavy-duty integral polyurethane cable with additional PTFE sheath (length to be specified on order) · Mounting: ¼" UNF female · xx = optional sensitivity in mV/g: 10, 25, 30 or 500 |
| MTN/2200IWQ-xx MTN2200IWQXX | Variant: 2200IW · Top entry · Connection: Heavy-duty integral polyurethane cable with additional PTFE sheath (length to be specified in order) · Mounting: Female Q/F quick-release base · xx = optional sensitivity in mV/g: 10, 25, 30 or 500 |
ATEX 4-20 mA Speed Transducer Monitran MTN/2285 (24)
| Reference | Configuration |
|---|---|
| MTN/2285I-2P-xx MTN2285I2PXX | Variant: 2285I-2P · Top Input · Connection: 2-pin MS connector · Mounting: ¼" UNF female · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285IQ-2P-xx MTN2285IQ2PXX | Variant: 2285I-2P · Top entry · Connection: 2-pin MS connector · Mounting: Female Q/F quick-release base · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285I-4P-xx MTN2285I4PXX | Variant: 2285I-4P · Top entry · Connection: 4-pin M12 connector · Mounting: ¼" UNF female · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285IQ-4P-xx MTN2285IQ4PXX | Variant: 2285I-4P · Top entry · Connection: 4-pin M12 connector · Mounting: Female Q/F quick-release base · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285IC-xx MTN2285ICXX | Variant: 2285IC · Top entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼" UNF female · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ICQ-xx MTN2285ICQXX | Variant: 2285IC · Top entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: Female Q/F quick-release base · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285IT-4P-xx MTN2285IT4PXX | Variant: 2285IT-4P · Top input · Temperature output 10 mV/°C · Ta up to +45 °C · Connection: 4-pin M12 connector · Mounting: ¼" UNF female · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ITQ-4P-xx MTN2285ITQ4PXX | Variant: 2285IT-4P · Top input · Temperature output 10 mV/°C · Ta up to +45 °C · Connection: 4-pin M12 connector · Mounting: Female Q/F quick-release base · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ITC-xx MTN2285ITCXX | Variant: 2285ITC · Top input · Temperature output 10 mV/°C · Ta up to +45 °C · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼" UNF female · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ITCQ-xx MTN2285ITCQXX | Variant: 2285ITC · Top input · Temperature output 10 mV/°C · Ta up to +45 °C · Connection: Integrated ETFE cable with stainless steel braid · Mounting: Female Q/F quick-release base · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285IW-xx MTN2285IWXX | Variant: 2285IW · Top entry · Submersible to 5 m (0.5 bar), IP68 · Connection: Integrated polyurethane cable with additional PTFE sheath · Mounting: ¼" UNF female · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285IWQ-xx MTN2285IWQXX | Variant: 2285IW · Top entry · Submersible to 5 m (0.5 bar), IP68 · Connection: Integrated polyurethane cable with additional PTFE sheath · Mounting: Female Q/F quick-release base · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285IS-2P-xx MTN2285IS2PXX | Variant: 2285IS-2P · Side entry · Connection: 2-pin MS connector · Mounting: ¼" UNF × 33 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISM6-2P-xx MTN2285ISM62PXX | Variant: 2285IS-2P · Side entry · Connection: 2-pin MS connector · Mounting: M6 × 35 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISM8-2P-xx MTN2285ISM82PXX | Variant: 2285IS-2P · Side entry · Connection: 2-pin MS connector · Mounting: M8 × 28 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285IS-4P-xx MTN2285IS4PXX | Variant: 2285IS-4P · Side entry · Connection: 4-pin M12 connector · Mounting: ¼" UNF × 33 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISM6-4P-xx MTN2285ISM64PXX | Variant: 2285IS-4P · Side entry · Connection: 4-pin M12 connector · Mounting: M6 × 35 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISM8-4P-xx MTN2285ISM84PXX | Variant: 2285IS-4P · Side entry · Connection: 4-pin M12 connector · Mounting: M8 × 28 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISC-xx MTN2285ISCXX | Variant: 2285ISC · Side entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼" UNF × 33 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISCM6-xx MTN2285ISCM6XX | Variant: 2285ISC · Side entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: M6 × 35 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISCM8-xx MTN2285ISCM8XX | Variant: 2285ISC · Side entry · Connection: Integrated ETFE cable with stainless steel braid · Mounting: M8 × 28 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISW-xx MTN2285ISWXX | Variant: 2285ISW · Side entry · Submersible · Connection: Integrated polyurethane cable · Mounting: ¼" UNF × 33 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISWM6-xx MTN2285ISWM6XX | Variant: 2285ISW · Side entry · Submersible · Connection: Integrated polyurethane cable · Mounting: M6 × 35 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/2285ISWM8-xx MTN2285ISWM8XX | Variant: 2285ISW · Side entry · Submersible · Connection: Integrated polyurethane cable · Mounting: M8 × 28 mm bolt · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
ATEX accelerometer 4-20 mA Monitran MTN/2287 (10)
| Reference | Configuration |
|---|---|
| MTN/2287I-2P-xx MTN2287I2PXX | Variant: 2287I-2P · Connection: 2-pin MS connector · Mounting: ¼" UNF female · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287IQ-2P-xx MTN2287IQ2PXX | Variant: 2287I-2P · Connection: 2-pin MS connector · Mounting: Female Q/F quick-release base · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287I-4P-xx MTN2287I4PXX | Variant: 2287I-4P · Connection: 4-pin M12 connector · Mounting: ¼" UNF female · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287IQ-4P-xx MTN2287IQ4PXX | Variant: 2287I-4P · Connection: 4-pin M12 connector · Mounting: Female Q/F quick-release base · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287IC-xx MTN2287ICXX | Variant: 2287IC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼" UNF female · Insulated base · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287ICQ-xx MTN2287ICQXX | Variant: 2287IC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: Female Q/F quick-release base · Insulated base · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287IT-4P-xx MTN2287IT4PXX | Variant: 2287IT-4P · Connection: 4-pin M12 connector · Mounting: ¼" UNF female · Temperature output 10 mV/°C; Ta up to +45 °C · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287ITQ-4P-xx MTN2287ITQ4PXX | Variant: 2287IT-4P · Connection: 4-pin M12 connector · Mounting: Female Q/F quick-release base · Temperature output: 10 mV/°C; Ta up to +45 °C · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287IW-xx MTN2287IWXX | Variant: 2287IW · Connection: Integrated polyurethane cable with additional PTFE sheath · Mounting: ¼" UNF female · Submersible to 5 m (0.5 bar), IP68, isolated base · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/2287IWQ-xx MTN2287IWQXX | Variant: 2287IW · Connection: Integrated polyurethane cable with additional PTFE sheath · Mounting: Female Q/F quick-release base · Submersible to 5 m (0.5 bar), IP68, insulated base · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
ATEX Accelerometer Group I 4-20 mA Monitran MTN/M1187 (2)
| Reference | Configuration |
|---|---|
| MTN/M1187IC-xx MTNM1187ICXX | Variant: M1187IC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼" UNF female · Top entry · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/M1187ICQ-xx MTNM1187ICQXX | Variant: M1187IC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: Female Q/F quick-release base · Top entry · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
IEPE ATEX Group I Accelerometer Monitran MTN/M2200 (10)
| Reference | Configuration |
|---|---|
| MTN/M2200I-xx MTNM2200IXX | Variant: M2200I · Connection: 2-pin MS connector (military-style C5015) · Mounting: ¼"-28 UNF female · Top input · xx = optional sensitivity 10, 30, 50, 500 or 1000 mV/g |
| MTN/M2200IQ-xx MTNM2200IQXX | Variant: M2200I · Connection: 2-pin MS connector (military-style C5015) · Mounting: Female Q/F quick-release base · Top input · xx = optional sensitivity 10, 30, 50, 500 or 1000 mV/g |
| MTN/M2200IC-xx MTNM2200ICXX | Variant: M2200IC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼"-28 UNF female · Top entry · xx = optional sensitivity 10, 20, 25, 30, 50 or 500 mV/g |
| MTN/M2200ICQ-xx MTNM2200ICQXX | Variant: M2200IC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: Female Q/F quick-release base · Top entry · xx = optional sensitivity 10, 20, 25, 30, 50 or 500 mV/g |
| MTN/M2200IS-xx MTNM2200ISXX | Variant: M2200IS · Connection: 2-pin MS connector (military-style C5015) · Mounting: ¼"-28 UNF × 33 mm bolt · Side entry · xx = optional sensitivity 10, 25, 30, 50 mV/g (±10%) |
| MTN/M2200ISM6-xx MTNM2200ISM6XX | Variant: M2200IS · Connection: 2-pin MS connector (military-style C5015) · Mounting: M6 × 35 mm bolt · Side entry · xx = optional sensitivity 10, 25, 30, 50 mV/g (±10%) |
| MTN/M2200ISM8-xx MTNM2200ISM8XX | Variant: M2200IS · Connection: 2-pin MS connector (military-style C5015) · Mounting: M8 × 28 mm bolt · Side entry · xx = optional sensitivity 10, 25, 30, 50 mV/g (±10%) |
| MTN/M2200ISC-xx MTNM2200ISCXX | Variant: M2200ISC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼"-28 UNF × 33 mm bolt · Side entry · xx = optional sensitivity 10, 25, 30, 50 mV/g (±10%) |
| MTN/M2200ISCM6-xx MTNM2200ISCM6XX | Variant: M2200ISC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: M6 × 35 mm bolt · Side entry · xx = optional sensitivity 10, 25, 30, 50 mV/g (±10%) |
| MTN/M2200ISCM8-xx MTNM2200ISCM8XX | Variant: M2200ISC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: M8 × 28 mm bolt · Side entry · xx = optional sensitivity 10, 25, 30, 50 mV/g (±10%) |
ATEX Group I 4-20 mA Speed Transducer Monitran MTN/M2285 (2)
| Reference | Configuration |
|---|---|
| MTN/M2285IC-xx MTNM2285ICXX | Variant: M2285IC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: ¼" UNF female · Top entry · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
| MTN/M2285ICQ-xx MTNM2285ICQXX | Variant: M2285IC · Connection: Integrated ETFE cable with stainless steel braid · Mounting: Female Q/F quick-release base · Top entry · xx = range 0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms |
Accelerometer 4-20 mA ATEX Group I Monitran MTN/M2287 (2)
| Reference | Configuration |
|---|---|
| MTN/M2287IC-xx MTNM2287ICXX | Variant: M2287IC · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: ¼" UNF female · Top entry · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |
| MTN/M2287ICQ-xx MTNM2287ICQXX | Variant: M2287IC · Connection: Integral ETFE cable with stainless steel overbraid · Mounting: Female Q/F quick-release base · Top entry · xx = range 0-1, 0-2, 0-5, 0-10 or 0-20 g rms |