TAI Indoor Air Temperature Sensor

Budget-friendly price Request a quote
Pt100, 4÷20mA, RS485/Modbus | -40 ÷ +80 °C | Pt100 1/3DIN (±0.1°C @ 0°C) | 26 x 220mm | 10÷30Vdc | Weight <80g

The NESA TAI is an indoor air temperature sensor with a 1/3DIN Pt100 platinum element (100 Ω @ 0 °C), a typical measuring range of -40 ÷ +80 °C and a plastic body (26 x 220 mm).

Each sensor is supplied with a calibration report and a 5m cable in three output versions: 4-wire natural Pt100 (TAI-N), 4÷20mA current (TAI-B) or RS485/Modbus output (TAI-C).

Key points

  • Platinum resistance thermometer 1/3DIN Pt100 (100 Ω @ 0 °C) according to DIN 43760 (±0.1 °C @ 0 °C)
  • Resolution of 0.015 °C and response time of less than 15 s
  • Body made of plastic material (26 x 220 mm; weight less than 80 g)
  • Available outputs with 5m cable: 4-wire Pt100 (TAI-N), 4÷20mA (TAI-B) and RS485/Modbus (TAI-C)
  • 10÷30Vdc power supply with typical consumption less than 0.1 W

Technical Frequently Asked Questions

What output signals does the TAI indoor sensor deliver?

It is available in three versions with a 5m cable: TAI-N (4-wire Pt100 natural output), TAI-B (4÷20mA current output) and TAI-C (RS485/Modbus output).

How do I order the TAI indoor temperature sensor?

The order code combines the sensor (TAI), the output (N, B, or C), the cable length (05 = CS05 of 5 m, 10 = CS10 of 10 m, xx* = CSxx, length in meters to be specified in the order), and the anodized aluminum SSM wall bracket for ø25 mm sensors, positioned approximately 12 cm from the wall. Manufacturer example: TAI C 10 SSM. Model references are TAI-N, TAI-B, and TAI-C.

Under what environmental conditions does the TAI sensor operate?

It operates under conditions of -50 ÷ +80 °C, with a power supply of 10÷30Vdc and typical consumption less than 0.1 W.

Properties

FeatureSpecification
Measurement and sensitive element
Measured magnitudeIndoor air temperature
Typical measurement range-40 to +80 °C
Transducer typePlatinum resistance thermometer 1/3DIN Pt100 (100 Ω @ 0 °C)
PrecisionDIN 43760 1/3DIN (±0.1°C @ 0°C)
Resolution0.015 °C
Response time< 15 s
Output signals and connections
Version N (TAI-N)Pt100 natural 4-wire, with 5m cable
Version B (TAI-B)4÷20mA (with optional MCS module), with 5m cable
Version C (TAI-C)RS485/Modbus RTU (with optional MCS module), with 5 m cable
Power supply, environment, and mechanical data
Feeding10÷30Vdc
Typical consumption< 0.1 W
Operating conditions-50 to +80 °C
Construction materialPlastic material
Dimensions26 mm; length 220 mm
Weight< 80 g
ProtectionAgainst polarity reversal and transients
ReferenceConfiguration
TAI-BTAIBModel: TAI · Body: Plastic, 26 x 220 mm · Output signal and supply: 4÷20mA, with 5 m cable
TAI-CTAICModel: TAI · Body: Plastic, 26 x 220 mm · Output signal and supply: RS485/Modbus, with 5 m cable
TAI-NTAINModel: TAI · Body: Plastic, 26 x 220 mm · Output signal and supply: Pt100 1/3DIN 4-wire, with 5 m cable
NESA TAI Indoor Air Temperature Sensor
Dimensional drawing and wire numbering of the NESA TAI indoor temperature sensor

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-hole shaft Ø20 H6 | Ø90 mm, tangential coupling | 9000–900000 imp/rev | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 shaft (IP65 wired output) | ±5″; 2200 kHz with interpolation
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø10 g7 | Housing Ø58 mm, centered Ø36 f5 | 1 to 2500 imp/rev | Push-pull or line driver | Power supply 5–24 V | IP54 shaft side | Max. frequency 100 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire diameter 0.51 mm | Stroke up to 6 m | Resolution 0.1 or 1 mm | SSI, Gray or binary; preset S1/S4 | 10–30 V DC | IP64 (IP65 connectors) | Linearity ±0.05 % fs.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
30 mm square flange | Housing Ø27 mm, shaft Ø6.35 h7 | 50–800 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz
DPF Sensors logo
Pressure transducer + temperature sensor
DPF Sensors logo
INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.
Dimetix_AG-1
Quick Start Package, Power and Connectivity Laser Range: Comprehensive equipment for interactive bench setups and preliminary testing
DPF Sensors logo
RS485 humidity and temperature sensor
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Profile 18 x 18 mm | Stroke 10 … 100 mm | Linearity ±0.05 … ±0.25 % | Repeatability ±0.002 mm | IP40 | Cable, connector M8 or M16
Shopping Basket