TPSI

Budget-friendly price Request a quote
Pressure transducer + temperature sensor
For applications in air conditioning and hydraulics

Properties

0..1 bar to 0…1000 bar
Temperature -50 .. +150º
-50 .. +150º medium temperature (max 15 min.)
0.50 % precision
Pressure output signal 0…10 Vdc, 0.5..4.5 Vdc, Temperature 0.25…4.75 Vdc R
1/4″ thread

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Aluminum housing Ø68 mm | Front and rear mounting | Ø10 g6 stainless steel shaft | 1 to 25,000 impedances/revolution | NPN, PNP, push-pull, driver, 1 Vpp | 5–30 V power supply | IP65 shaft (IP66 sealed)
DPF Sensors logo
DC-DC Converter, Regulator Isolator. 12 to 24 Vdc
DPF Sensors logo
Converter for averaging 4 RTD signals to 4/20mA
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange 63, shaft Ø9.52 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Monitran-Logo
4-20 mA proportional to rms acceleration (g rms) | Two wires for PLC, DCS and controllers | 12-32 V DC | 2 Hz to 1 kHz ±10% | Faraday cage electronics | Stainless steel | IP67 (IP68 on 2287W)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
90 mm flange, servo, 12 mm h7 shaft | Up to 2²⁴ steps in 4096 revolutions | Gray, binary or BCD | Parallel NPN/push-pull or SSI RS422 | Power supply 5 ±5 %, 8–24 or 18–28 V | IP64 shaft (IP65 sealed) | Optional latch, zero LED, multiplexer
Monitran-Logo
1100 pC/g ±10% | -55 to 250 °C | ±100 g | Integrated TNC connector | Stainless steel, IP65 | Requires charge amplifier
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø102, spindle Ø12 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 spindle (IP66 sealed) | Gray, Binary, Excess or BCD | Front or side mounting
NESA Environmental Meters
0÷2Vdc · 4÷20mA · RS485/Modbus | 0÷100% VWC · 0-20 mS/cm | FDR 70MHz · PT100 | AISI 316L STAINLESS STEEL electrodes | 71 x 45 x 16mm | 12÷24Vdc | IP68
Shopping Basket