XCA-xx-x

Budget-friendly price Request a quote
INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.

INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, output signal 4-20mA / 0-5 Vdc / CAN / RS485/ TTL / 422, Power supply 9…36 Vdc, environmental protection IP67, Working temp. -40…+85ºC, MTBF 10 years, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.

Properties

Other products

DPF Sensors logo
Analog CO2 sensor with configurable scaling function
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Flange Ø45, shaft Ø6 h7 | Up to 256 steps (8 bits) | Parallel | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed) | Gray, Excess or custom
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductive, contactless | Output 0.1 … 10 V or 4 … 20 mA | Stroke 100 … 1000 mm | Linearity ≤ ±0.025 % FS (min. ±100 µm) | Resolution 10 / 20 µm | 18 … 32 VDC | IP67
DPF Sensors logo
Linear position sensor by wire with incremental encoder, 1,000 mm travel and resolution up to 0.04 mm/pulse, with push-pull output or line driver.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
56 mm square flange | Solid shaft Ø8 h7, centered Ø16 h7 | 1 to 1024 pulses/revolution | NPN, push-pull or line driver | 5–30 V power supply | IP53 shaft side | Max. frequency 60 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–8 mm | Housing Ø38 mm | 1 to 2500 impedances/revolution | Push-pull; line driver (5 V only) | Power supply 5 V ±5 %, 5–12 V, 12–24 V | IP54 shaft side | Elastic coupling
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive, non-contact | CAN SAE J1939 | Stroke 50 … 2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC (8 … 34 VDC) | 350 bar · IP67
Monitran-Logo
Top or Side Input | Load Output (No Amp) | Sensitivity 5 to 1100 pC/g | Frequency 1Hz-30kHz | Dynamic Range up to ±2000g | Mass 7g to 250g | Temp. -55 to 250°C | IP65/IP66 Protection | Stainless Steel | Microdot Connector
DPF Sensors logo
Digital pressure transducer
Shopping Basket