Linear Cable Transducer F600S

Budget-friendly price Request a quote
Absolute, wire diameter 0.51 mm | Stroke up to 6 m | Resolution 0.1 or 1 mm | SSI, Gray or binary; preset S1/S4 | 10–30 V DC | IP64 (IP65 connectors) | Linearity ±0.05 % fs.

The ELCIS F600S is an absolute wire linear transducer, with 0.51 mm diameter wire and SSI output, for measuring linear displacements up to 6 meters.

The electronics incorporate ASIC photodiodes with a 100,000-hour LED light source and a line driver (according to RS422), using SMD technology. It is protected against reverse polarity and overvoltage, with an unbreakable encoder disc and EMC certification according to EN 50081-2 and EN 61000-6-2. SSI interface: (SL), (S1) with preset, and (S4) with preset push button (radial output only).

Encoder and mechanics IP64; 1 m cable, 12-pin connector, axial or radial (CAW, CRW, PAL, PRL), IP65. 98% humidity (not in liquid state). Operating temperature -20 to +70 °C and storage temperature -40 to +85 °C. Weight 1.4 kg depending on stroke.

  • Max. standard stroke 6 meters (6000+50 mm according to the plan) and resolution of 0.1 mm either 1 mm, in Gray or binary code.
  • Exit SSI: (SL), (S1) with preset and (S4) with preset push button (only with radial output).
  • Thread of stainless steel Ø 0.51 mm and average lifespan of the transducer >10⁶ cycles at 2 m/s.
  • Maximum linearity error of ±0.05 % fs., max. read speed of 4 m/s and max. acceleration of 2.5 G.
  • Encoder and mechanics IP64; cable and connectors IP65.

Technical Frequently Asked Questions

What communication interface does the F600S transducer have?

SSI, in versions (SL), (S1) with preset and (S4) with preset push button (radial output only). Transmission is RS485/RS422 and the supported clock frequency ranges from 100 kHz to 1 MHz.

What career paths and resolutions does it offer?

Standard max. stroke of 6 meters (6000+50 mm according to the plan), with resolutions of 0.1 mm (code 100) and 1 mm (code 1000) and Gray (G) or binary (B) output code.

What connection options are available?

1m cable with 12-pin connector, axial or radial (CAW, CRW, PAL, PRL), all IP65. The (S4) with preset push button is only available with radial output.

Properties

FeatureSpecification
Mechanics
Max standard stroke.6 m
Weight1,4 kg depending on the career
Electric
Resolution / Exit Code0,1 mm, 1 mm · Gray, Binary
Maximum linearity error.±0.05 % fs.
Vcc Power Supply10÷30 Vcc
Max. consumption.1 W (SL), 1.5 W (S1)
Output interface(SL) SSI · (S1) SSI + Preset · (S4) SSI + preset button
Protection and environment
Maximum reading speed / acceleration4 m/s · 2.5 G
Transducer average lifespan>10⁶ cycles at 2 m/s
Impact/vibration resistance30 G (11 ms) · 10 G (10 ÷ 1000 Hz)
Operating temperature-20 ÷ +70 °C
Protections and certificationReversal of polarity and overvoltages; EMC according to EN 50 081-2 and EN 61000-6-2
Degree of protectionEncoder and mechanics: IP64 · Cable and connectors: IP65
Other features
ThreadØ 0.51 mm stainless steel
Forces on the cableExit 20 N · Return 10 N
ReferenceConfiguration
L/F600S-G-100-1030-CAWLF600SG1001030CAWGray code output · 0.1 mm resolution · 10–30 V DC · 1 m axial cable length · IP65
F600S-B-1000-1030-CAWF600SB10001030CAWBinary output code · Resolution 1 mm · 10÷30 V DC · Cable length 1 m axial · IP65
F600S-B-100-1030-CAWF600SB1001030CAWOutput code Binary · Resolution 0.1 mm · 10÷30 V DC · Cable length 1 m axial · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS F600S Linear Cable Transducer
Dimensional drawing of the ELCIS F600S linear cable transducer

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø41 mm | Shaft Ø6.35 h7, centered Ø34.92 h7 | 1–2540 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Ø 28 mm | Shaft Ø 6 mm or push-in coupling | Max. Ub 42 VDC | IP54 or IP65 | 100° to 345°, 1 or 2 channels
ATESTEO LOGO, manufacturer of torque sensors
Inductive (Dual-Frequency) | 1,000 – 3,000 N·m | 16,000 RPM | PCD Flange 130.0 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange mounting Ø115 mm | Housing Ø96 mm, shaft Ø11 h7 | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 with Z option) | Up to 6000 rpm (3000 with Z)
DPF Sensors logo
MP633 PRESSURE
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Profile 18 x 18 mm | Stroke 25 … 150 mm | Linearity ±0.05 … ±0.2 % | Repeatability ±0.002 mm | IP40 | Cable, connector M8 or M16
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø80, servo type flange | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Integrated counter with display | Display -99.99 to +99.99 | 100 pulses/revolution with latching | NPN, PNP, push-pull, driver | 5V or 8–28V power supply | IP64 shaft (IP65 output)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □80, centered Ø40 h7 | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø10 g7 | Housing Ø58 mm, centered Ø36 f5 | 1 to 2500 imp/rev | Push-pull or line driver | Power supply 5–24 V | IP54 shaft side | Max. frequency 100 kHz
Shopping Basket