DPF-MITH
RS485 humidity and temperature sensor
- Manufacturer: DPF Sensors
- Category: SENSORS, Humidity Sensors
RS485 humidity and temperature sensor. This sensor is designed to measure temperature and relative humidity in indoor environments.
Properties
Range: Humidity: 10…95% / Temperature: -40 °C ÷ +125°C
Power supply 16…36 Vdc
Programmable in all ranges
EXIT SIGNAL: 
Other products
Power supply 5-30V | Shaft diameter 6-10mm | Weight 550g | Bearing life 1.5 x 10^9 revolutions | Impact resistance 50G x 11ms | Vibration 12G (10-2000Hz) | Operating temperature 0-70°C | Pulses/rev 1-2540 | Max frequency 60kHz | Output Push-Pull/NPN
Dual Inductive Metrology | Limit 500 N·m | 21,000 RPM | PCD Flange 84.0 mm | Accuracy 0.04% | Inertia 0.0017 kg·m²
Precision Microprobe | Ranges 2mm to 20mm | Ball Bearings | Repeatability 0.15 µm | P/V Pneumatics | IP65 Protection | Viton Bellows
Converter for averaging 4 RTD signals
Power supply 5V | Base Stainless Steel | Cover Anodized Aluminum | Weight 1200g | Shaft Ø20mm | Max RPM 600 | Starting Torque 5000gcm | Bearing Life 1.5e9 revs | Shock Resistance 30G | Operating Temp 70°C
4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC
Power supply: 5V DC | Shaft diameter: 11mm Stainless Steel | Weight: 2800g | Maximum load: 10kg | Output: Push-Pull | Protection: IP65 | Bearing life: 1.5×10^9 Revs | Temperature: 0 to 70°C | Maximum frequency: 60kHz | Light source: LED
