Incremental Encoder Kit and Low Cost I/58EH
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder Kit Low Cost, SENSORS
The industrial sector seeks robust sensors that don't compromise automation budgets. This Low-Cost Incremental Encoder Kit I/58EH addresses the need for a reliable incremental encoder for general applications, offering an economical solution without sacrificing mechanical durability in demanding environments.
Designed for heavy-duty applications, it supports continuous speeds up to 6000 rpm with a starting torque of 18 gcm. The LED light source guarantees over 100,000 hours of lifespan and a maximum frequency response of 100 kHz, ensuring accurate signals in high-speed control systems.
Constructed from aluminum and stainless steel, Ø 10, it withstands vibrations of 10G and shocks of 40G x 11ms. Operation between -10 and 70 °C ensures thermal stability in heavy machinery. Available in guemisa.es.
- It supports continuous speeds up to 6000 rpm with a starting torque of 18 gcm.
- Certified bearing life of 1.5 x 10^9 turns for high durability.
- Mechanical resistance to vibrations of 10G and shocks of 40G x 11ms.
- Maximum output signal frequency set at 100 kHz.
Technical Frequently Asked Questions
How does the I/58EH differ from the standard I/E6 model?
The I/58EH is optimized for heavy-duty applications with a weight of 200g and a 10mm diameter stainless steel shaft, while the I/E6 is typically more compact. Both share the push-pull output and 5V power supply, but the 58EH stands out for its superior mechanical robustness and vibration resistance of 10G (10–2000Hz), making it ideal for demanding industrial machinery where bearing durability is critical.
What alignment precautions are required for the I/58EH shaft during assembly?
It is crucial to ensure that the 10 mm diameter stainless steel shaft is perfectly centered to prevent premature wear of the bearings, which are designed for a lifespan of 1.5 x 10^9 revolutions. Excessive misalignment can compromise the accuracy of the pulses per revolution (1 ÷ 2500) and generate electrical noise, affecting signal integrity in high-speed applications such as continuous 6000 rpm.
What connectors and output options are available for the I/58EH?
The model offers flexible configurations with Push-Pull or Line Driver outputs (5V or 5-24V). For connections, you can choose between a 1m CVC cable, a VMC/TMC/VLC/TLC terminal block, or CC7/CC9 connectors. An IP65 option is available for dusty or wet environments, while the standard version has IP54 protection on the output side, based on the base specifications.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental |
| Main Application | Heavy Duty / General Purpose |
| Feeding | 5V ±5% or 5÷24V |
| Axis | Stainless Steel Ø 10 mm |
| Weight | 200 grams |
| Bearing Life | 1.5 x 10^9 turns |
| Starting Torque | 18 gcm |
| Maximum Continuous Speed | 6000 rpm |
| Impact Resistance | 40G x 11ms |
| Vibration Resistance | 10G (10÷2000Hz) |
| Operating Temperature | -10 to 70 °C |
| Pulses for Revolution | 1 ÷ 2500 |
| Maximum Signal Frequency | 100 kHz |
| Maximum Consumption | 120 mA |
Other products
