I/68LL ROBUST Incremental Encoder
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Robust Incremental Encoder
The ELCIS I/68LL incremental encoder is a robust and compact solution designed for demanding industrial environments. Its fully machined anodized aluminum housing offers excellent mechanical protection and versatile mounting options (side or rear heel) to suit a wide range of applications.
It offers configurable resolutions from 1 to 25,000 ppi, with a maximum standard output frequency of up to 100 kHz (optional up to 300 kHz) for special versions.
The standard shaft is Ø 10 mm with a radial/axial load capacity of up to 3 kg, and starting is guaranteed with a typical starting torque of 18 g·cm (standard version) at continuous speeds of up to ~6,000 rpm.
The bearings and construction ensure resistance to impacts of 50 G × 11 ms and vibrations of 12 G in the 10-2,000 Hz range.
This model is ideal for machinery, industrial automation, integration into motor or gearbox shafts, where high resolution, high signal frequency and a mechanical construction capable of withstanding demanding environments are required.
Properties
| Parameter | Specification |
|---|---|
| Model | ELCIS I/68LL |
| Guy | Incremental encoder, solid shaft |
| Housing diameter | Ø 68 mm (≈) |
| Shaft diameter | Ø 10 mm (standard version) |
| Resolution | 1 … 25,000 ppr |
| Output frequency | Up to 100 kHz standard → option up to 300 kHz |
| Feeding | 5 ÷ 30 V DC (standard version) |
| Typical consumption | 120 mA (standard line-driver version) |
| Maximum continuous speed | Approximately 6,000 rpm (typical value) |
| Impact resistance | 50 G × 11 ms |
| Vibration resistance | 12 G (10-2,000 Hz) |
| Operating temperature | 0 °C … +70 °C |
| Storage temperature | -30 °C … +85 °C |
| Protection | Anodized aluminum housing; IP sealing options depending on version |
| Approximate weight | 520 g (standard version) |
Other products
