Incremental Encoder for I/46 Motors
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS
This I/46 Incremental Motor Encoder addresses the critical need for precise feedback in industrial motor control systems. Its compact design allows for direct integration onto rotating shafts without mechanical interference, ensuring stability in vibrating environments where other sensors fail due to premature fatigue or excessive misalignment during daily operation.
The technical solution integrates a high-resolution optical sensor with up to 5000 PPR, compatible with Push-Pull and Line Driver outputs for universal electrical compatibility. It supports continuous speeds of 6000 RPM with low starting torque, minimizing stress on internal bearings while maintaining digital signal integrity even in the face of mains voltage fluctuations.
Built with an aluminum housing, IP63 protection on the output, and a stainless steel shaft, it withstands temperatures from 0 to 70 degrees Celsius. Resistant to 50G impacts and 12G vibrations, this component is ideal for heavy machinery. Available in guemisa.es.
- Adjustable resolution up to 5000 PPR per revolution.
- Bearing life greater than 1.5 x 10^9 revolutions.
- Electrical resistance to impacts of 50G x 11ms.
- Operating temperature between 0 and 70 degrees Celsius.
Technical Frequently Asked Questions
How does the I/46 model differ from the I/58M model?
The I/46 is more compact (100g) and optimized for standard motors, while the I/58M offers higher mechanical resolution. Both belong to the incremental family but differ in physical dimensions and maximum permissible load on the direct drive shaft.
What alignment precautions does the I/46 shaft require?
The encoder supports axial compensation of ±0.2 mm and radial compensation of ±0.15 mm. It is crucial to ensure the mounting surface is free of burrs to prevent damage to the IP63 seals during initial installation on heavy machinery.
What connectors and output options are available for the I/46?
NPN, PNP, Push-Pull, and Line Driver outputs are available with VM, TM, or clamp connectors. Versions with unbreakable Y-discs or impregnated Z-electronics are also available for specific harsh chemical environments in the automotive industry.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Optical Incremental |
| Main Application | Motors and Servos |
| Standard Feeding | 5V ±5% |
| Material Axis | Stainless steel |
| Shaft Diameter | Ø6÷8mm |
| Total Weight | 100g |
| Maximum Axial Load | 0.5kg |
| Continuous Speed | 6000 RPM |
| Starting Torque | 15 gcm |
| Vida Cuscinetti | 1.5 x 10^9 turns |
| Impact Resistance | 50G x 11ms |
| Vibration Resistance | 12G (10-2000Hz) |
| Operating Temperature | 0 ÷ 70°C |
| Pulses for Revolution | 1 ÷ 5000 PPR |
| Maximum Frequency | 60 kHz |
Other products
