Incremental Encoder Kit and Low Cost I/56QJ
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder Kit Low Cost, SENSORS
The Incremental Encoder Kit and Low Cost I/56QJ solves the critical need for economical position sensors without sacrificing mechanical reliability in generic industrial applications where budget is a determining factor.
Built on a composite base and Valox 420 cover, it offers long-life bearings (1.5 x 10^9 turns) and vibration resistance of 12G in the range of 10 ÷ 2000 Hz, ensuring operational stability under demanding conditions.
Its Ø8mm stainless steel shaft supports radial loads of up to 1kg and operates within a temperature range of 0–60°C, making it ideal for environments with available IP65 protection. See full technical availability at [link to availability information]. guemisa.es.
- The composite base and Valox 420 lid reduce the total weight to 120g.
- Bearings with a lifespan of 1.5 x 10^9 turns guarantee durability.
- Impact resistance of 50G and vibration resistance of 12G ensure mechanical reliability.
- Push-Pull or NPN output compatible with 88C30 line controllers.
Technical Frequently Asked Questions
How does the I/56QJ differ from the I/E6 model?
The I/56QJ belongs to the Kit and Low Cost Series, prioritizing a composite base and a weight of 120g over the more robust design of the I/E6. While the I/E6 typically requires specific configurations for demanding environments, the I/56QJ is optimized for generic applications where price is a determining factor without sacrificing quality.
What alignment precautions are required for the I/56QJ shaft?
The Ø8mm stainless steel shaft requires precise alignment to avoid unwanted axial loads, as its design is optimized for a maximum radial load of 1kg. It is recommended to verify the phase tolerance of ±15° during installation to ensure sensor integrity and prevent premature wear.
What connectors and output options are available for the I/56QJ?
The model supports multiple connection configurations, including CV cable, cable end connectors (VM, VE), or terminal blocks. Outputs include Open Collector NPN, Push-Pull PRO, and 88C30 line driver, allowing the encoder to be adapted to different electronic controllers as needed.
Properties
| Feature | Specification |
|---|---|
| Base Material | COMPOSITE MATERIAL |
| Cover Material | VALOX 420 |
| Weight | 120 g |
| Axis | STAINLESS STEEL Ø 8 |
| Maximum shaft load/radius. | 1 kg |
| Max. continuous revolutions | 6000 RPM |
| Starting torque | 15 gcm |
| Bearing life | 1.5 x 10^9 turns |
| Impact resistance | 50 G x 11ms |
| Vibration resistant | 12 G (10 ÷ 2000 Hz) |
| Operating temperature | 0 ÷ 60 °C |
| Number of impulses/revolution | 1 ÷ 1024 |
| Maximum frequency | 60 kHz |
| Maximum consumption mA (Standard) | 120 mA |
Other products
