Miniature Incremental Encoder I/27L

Budget-friendly price Request a quote
Housing Ø27 mm | Shaft Ø3.17 h7, centered Ø25.4 h7 | 50–800 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz

The ELCIS 27L (I/27L) is a miniature incremental encoder of Ø27 mm with a solid shaft of Ø3.17 h7 and anodized aluminum housing.

It features a Ø25.4 h7 front centering and a Ø3.17 h7 solid stainless steel shaft. It delivers 50 to 800 pulses per revolution with a maximum frequency response of 60 kHz. Compatible with NPN, PNP, push-pull, 26LS31 driver, 88C30 driver, and TTL 7404 electronics, with a 5 V ±5 % voltage.

It supports rotation speeds up to 6000 rpm continuous (12000 rpm in low torque option), protection up to IP65 on the shaft and connection by cable or connectors on cable with axial or radial output.

  • Housing Ø27 mm: cylindrical casing of Ø27 mm and 90 g in weight.
  • Miniature axle Ø3.17 h7: stainless steel with front centering Ø25.4 h7.
  • Electronics: 10 codes available (K, Q, R, P, U, B, H, N, T, C) with NPN, PNP, push-pull outputs, 26LS31, 88C30 and TTL drivers.
  • Bearing options: standard, IP65 sealed or low torque bearings.

Technical Frequently Asked Questions

What is the shaft diameter of the I/27L miniature encoder?

It has a solid stainless steel shaft of Ø3.17 h7.

What are the main mechanical dimensions of the I/27L model?

It features a housing diameter of Ø27 mm, a front centering of Ø25.4 h7 and a weight of 90 g.

What electronic outputs does it offer?

It supports NPN, PNP, push-pull electronics, 26LS31 driver, 88C30 driver and TTL 7404.

Properties

FeatureSpecification
Mechanics
HousingMetal Ø27 mm
Weight90 g
AxisØ3.17 h7 stainless steel (customizable upon request)
max radial/axial load.0,4 kg
Electric
Exit-side protectionDepending on the connection: IP00 to IP65 (see technical data sheet)
Feeding5 V ±5 % (see technical sheet)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap50 to 800
Max frequency.60 kHz
Protection and environment
axle-side protectionIP64 standard • IP65 sealed (Z) • IP53 low torque (B)
max. continuous RPM6000 standard · 4500 sealed · 12000 low torque (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/27L-500-5-BZ-N-VL-01I27L5005BZNVL01500 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · Cable with standard 10-pin connector · axial output
ELCIS I/27L miniature incremental encoder
Dimensional drawing of the ELCIS I/27L miniature incremental encoder

Related documentation, cases, and guides

Other products

DPF Sensors logo
Ultrasonic level sensor, range up to 10 meters, RS485/4-20 mA/0-5 Vdc output signal.
NESA Environmental Meters
Pt100, 4÷20mA, RS485/Modbus | -40 ÷ +80 °C | Pt100 1/3DIN (±0.1°C @ 0°C) | 26 x 220mm | 10÷30Vdc | Weight <80g
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output to Ub | Ø 79 mm | Shaft Ø 13 mm or Ø 10 mm | Ub max. 42V | IP67 / IP6K9K | 120°, 200° or 350°, 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange Ø115, centered Ø85 h7 | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
DPF Sensors logo
FLOAT LEVEL SWITCH
LVDT Manufacturer Logo Schreiber Messtechnik
Angular LVDT | Ranges 30° to 120° | Accuracy up to 0.25% | Integrated Electronics | Robust Housing Ø 58 mm | Outputs 4-20mA / ±10V
ATESTEO LOGO, manufacturer of torque sensors
20 · 50 · 100 · 200 · 500 · 1000 N·m | Clase 0,05 % | 20 000 rpm (30 000 opc.) | Rotor Ø95,50 mm | Taladros 75,0 mm | RS422, tensión, corriente, bus CAN
Keller logo
Digital pressure gauge datalogger for recording pressure and temperature
NESA Environmental Meters
VOC | 0…100 to 0…1000 ppm | 4÷20mA / ModBus RS485 | -35 ÷ +70°C | 11÷30 Vdc | IP65 | < 200g
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Wire diameter 0.51 mm | Stroke 750 or 1500 mm | Potentiometric output (divider) | Potentiometer 1 kΩ | Linearity ±0.25 % fs | IP50 potentiometer (IP54 mechanical) | Connection length 1 to 5 m
Shopping Basket