Explosion-Proof Multi-Turn Absolute Encoder A/0B80EXS

Budget-friendly price Request a quote
B10 flange Ø115, centered Ø85 h7 | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6

The ELCIS 0B80EXS (A/0B80EXS) is a 24 or 25 bit explosion-proof, multi-turn absolute encoder with a B10 Ø115 flange. Approved by ISSeP according to CENELEC standards, suitable for locations with potentially explosive atmospheres (except firedamp), with markings II 2 G Ex d IIC T6 and D Ex tD A21 IP6X T85°C.

Resolution of 4096 steps per revolution (12-bit) in 4096 revolutions (12-bit) or 8192 revolutions (13-bit), in Gray code, with magnetic sensors. SSI serial interface with RS422 transmission and clock frequency of 100 kHz to 2 MHz. Ordering resolution: 12 (Gray 4096 × 4096) or 13 (Gray 4096 × 8192).

Aluminum housing with B10 flange (Ø115) and Ø85 h7 centering, stainless steel shaft Ø10 h7, and a weight of 1300 g. Connection via 1 m IP66 cable (CV3) or 26c IP65 cable end connector (VM5, TM5, only outside the explosion-risk area). Options: sealed bearings (Z), stainless steel housing (N), tropicalization (G), and variants according to specification (X). The encoder is supplied with a cable suitable for a minimum temperature of 100 °C permanently attached to it.

  • Marked II 2 G Ex d IIC T6 and D Ex tD A21 IP6X T85°C, ISSeP07ATEX018X certificate.
  • B10 (Ø115) flange with centering Ø85 h7.
  • Multi-turn 24 or 25 bit: 4096 steps per lap in 4096 u 8192 turns.
  • Exit SSI series (RS422) in Gray code, clock of 100 kHz to 2 MHz.
  • Stainless steel shaft Ø10 h7, max. radial/axial load. 10 kg.

Technical Frequently Asked Questions

What electronic output and interface does the 0B80EXS multi-turn encoder have?

SSI serial interface (MS) in Gray code, with SSI serial electronics (5), RS422 transmission and supported clock frequency from 100 kHz to 2 MHz.

What resolution, axis, and power supplies does it support?

24 or 25 bit resolution: 4096 steps per revolution in 4096 revolutions (code 12) or 8192 revolutions (code 13). Stainless steel shaft Ø10 h7. Power supply 5 V ±10 % or 10÷30 V.

What connections and IP rating does it support?

1 m IP66 cable (CV3) or 26c IP65 cable end connector (VM5) and 26c sealed IP65 (TM5), these two only outside the explosion-risk area. Shaft side: IP65 standard and IP66 with sealed bearings (Z). Ambient temperature T6: -20 … +40 °C.

Properties

FeatureSpecification
Mechanics
Base and lidAluminum (base) · anodized aluminum (lid)
Weight1300 g
AxisØ10 h7 stainless steel
max radial/axial load.10 kg
Electric
Exit-side protectionAccording to connection: IP66 cable, connector at IP65 end of cable
Max resolution.4096 (12 bit) in 8192 turns (13 bit); 24 or 25 bit multiturn
Exit code and interfaceGray · SSI (MS), RS422 transmission
Maximum clock frequency2 MHz (supported clock: from 100 kHz to 2 MHz)
Feeding10÷30 Vcc, 5 V ±10 %
Max. consumption.1,2 W
Protection and environment
axle-side protectionIP65 standard · IP66 with sealed bearings (Z) (IP rating according to CEI EN 60529, EN 60529, IEC 529)
max. continuous RPM6000 standard · 3000 with sealed bearings (Z)
Impact/vibration resistance50 G (11 ms) · 12 G (10 ÷ 2000 Hz)
TemperatureOperating -20 … +70 °C • ambient (T6) -20 … +40 °C • storage -30 … +85 °C
ReferenceConfiguration
A/0B80EXS-12-1030-MS-5-CV3-RA0B80EXS121030MS5CV3RGray 4096 × 4096 · 10 ÷ 30 V · version: MS · electronics: 5 · 1 m cable, IP66 · radial output
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
Explosion-proof absolute encoder ELCIS A/0B80EXS
Dimensional drawing of the explosion-proof absolute encoder ELCIS A/0B80EXS

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □63.5, shaft Ø9.52 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
Disibeint Electronic, manufacturer of level sensors and control relays
HYPALON ECO LEVEL SWITCH
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange Ø115, centered Ø85 h7 | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
NESA Environmental Meters
Rockfall alert | 1 to 8 electromechanical sensors | SigFox / LoRa 868/915MHz radio | 5-year lithium polymer battery | -40 to +60°C | Ø 30cm | CE
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Square flange □110 mm | 100 imp/revolution with interlock | 1–2500 imp/revolution (option F) | NPN, PNP, push-pull, driver | Power supply 5–30 V depending on version | IP65 shaft side (output IP53–IP67)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen (prototype) | Ø 48 mm | Up to 16 bits per revolution | Plug-in hollow shaft | 8 … 32 VDC | Open system | Measuring range: 44 revolutions (15840°)
NESA Environmental Meters
4 default parameters | pH 0÷14 | Level 0÷20 m | -5 ÷ +60 °C | RS485 | 10.8 ÷ 16Vdc | 512×42mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Servo flange type | 100 impedances/revolution with latching | 1–2500 impedances/revolution (option F) | NPN, PNP, push-pull, driver | Power supply 5–30 V depending on version | IP65 shaft side (output IP00–IP67)
NESA Environmental Meters
4÷20mA / ModBus RS485 | CO2 | 0÷10000 / 0÷40000 ppm | -40 ÷ 50°C | 11…30 Vdc | IP65 / IP54 | 230g
Shopping Basket