DRUE

Budget-friendly price Request a quote
Ultrasonic level sensor, range up to 10 meters, RS485/4-20 mA/0-5 Vdc output signal.

Ultrasonic level sensor, range up to 10 meters, RS485/4-20 mA/0-5 Vdc output signal.
Level ranges 0- 2.5 m, 5 m, 10 m
Automatic temperature compensation from 0-50ºC
Very precise, stable, short response time.

Properties

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø9.52 h7 | Square flange 63.5 mm | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z seal) | Max. frequency 60 kHz
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Current output 4 … 20 mA | Ø 69 mm | 12-bit resolution | Shaftless: magnetic position marker | 12/24 VDC (9 … 34 VDC) | IP67 / IP69K | 60° to 360°, 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø6, 8, 10, 12 or 15 mm | Housing Ø59 mm | 1 to 50000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP65 Z-seal) | Elastic coupling
Pesacam logo: Weighing systems for trucks
Onboard scale | Air suspension | In-cab indicator | Wired connection | 2 or 3 sensors | Manufactured in Bellvei (Tarragona)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
38 mm square flange | Shaft Ø6.35 h7, centered Ø17.46 h7 | 1–2540 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
Monitran-Logo
Dual output: 4-20 mA proportional to RMS speed + AC proportional to acceleration | AC 100 mV/g 50 mV/g | 2 Hz to 1 kHz ±10% (mm/s) | 12-32 V DC | -25 to 90 °C | Stainless steel, IP67 / IP68 (1186W)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6–10 mm | Housing Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Star-shaped, compensates ±1 mm axial
NESA Environmental Meters
6 real-time parameters | RS485 or USB (with IS485/USB module) | pH 0÷14 | Level 0÷20 m / 0÷50 m | -5 ÷ +60°C | 10.8 ÷ 16Vdc | 512 x 70 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø58, shaft Ø10 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo or screw mounting, Ø58 mm | Shaft Ø6 h7 | 1–3600 impedances/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Two isolated electronics
Shopping Basket