INMR-ECO
Budget-friendly price Request a quote
FLOAT LEVEL SWITCH
- Manufacturer: DPF Sensors
- Category: SENSORS, Level Sensors
The INMR-ECO is a float level switch designed for maximum or minimum level control in liquids.
It is especially suitable for dirty or wastewater.
It incorporates a 10 A / 250 VAC SPDT microswitch.
Available with a cable of 6, 10 or 15 meters.
Properties
- Float level switch for liquids.
- Maximum or minimum level control.
- Suitable for dirty or wastewater.
- Body made of PP.
- SPDT microswitch 10 A / 250 VAC.
- Maximum temperature: +60 ºC.
- Maximum pressure: 6 kg/cm².
- IP68 protection rating.
- Available with 6, 10 and 15 meter cable.
Related documentation, cases, and guides
Other products
Housing Ø58, shaft Ø10 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Wirelessly configurable RTD to 0/10V converter in chip format
Hollow shaft Ø6 or Ø8 mm | Housing Ø46.5 mm | 1 to 5000 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Tangential coupling
Shaft Ø8 h7 | 80 mm square flange | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z-seal) | Max. frequency 60 kHz
Top Input | Sensitivity 50mV/g | Dynamic Range ±160g | Frequency 2Hz-10kHz | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Insulated Base | 2-pin Connector Mil-C-5015
Hollow shaft Ø6÷15 H7 | Housing Ø59 mm | 1 to 3600 impedances/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP65 shaft (IP66 Z-sealed) | Tangential coupling
2 cantilever metric casters | Wheels Ø79.8 mm | 1, 10 or 1000 mm/imp | NPN or push-pull | 5 V ±5 % or 12–24 V | IP52 shaft; IP65 wired output | Up to 180 kHz
Digital Inductive Coupling | 2,500 – 20,000 N·m | 17,000 RPM | PCD Flange 196.0 mm | Inertia 0.0788 kg·m²
Compact digital pressure gauge, 31 and 300 bar, with MIN/MAX display
Hollow shaft Ø6–15 mm | Standardized flange Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Internal helical coupling