Schreiber SM62 Series Inductive Angle Sensor | LVDT Angular Ø 58 mm
- Manufacturer: Schreiber Messtechnik
- Category: Displacement, Angled LVDT, SENSORS, LVDT Sensors
He inductive angle sensor of the Schreiber SM62 series, often technically referred to as angular LVDT The RVDT is the heavy-duty metrology solution for high-precision rotary measurement. With a robust 58 mm anodized aluminum housing and a 6 mm stainless steel shaft on industrial bearings, this transducer guarantees infinite resolution and a long service life without mechanical wear. It is the ideal component for the positioning in manipulators, rotors and robotic systems that demand maximum reliability under extreme vibration conditions.
This linear angle transducer It incorporates all the amplification electronics internally, delivering calibrated analog signals (0/4-20 mA, ±10 V or 0-10 V) ready for direct integration. It includes protection. IP65 and supporting speeds of up to 3000 rpm, the SM62 allows connect position sensors to PLC It performs flawlessly, maintaining a temporal stability greater than 0.1% over 24 hours. Thanks to its inductive half-bridge technology, it is immune to external dirt and oils, far outperforming optical encoders in dirty environments. Consult with our technical department for the ideal coupling design for your application.
Properties
| Engineering Parameter | Technical Specification SM62 |
|---|---|
| Technical Name | Inductive Angle Sensor (LVDT Angular / RVDT) |
| Housing/Shaft Diameter | Housing Ø 58 mm / Shaft Ø 6 mm (Stainless Steel) |
| Standard Angles (Degrees) | 30º, 45º, 60º, 75º, 90º, 105º, 120º |
| Current Outputs (.621-4) | 0-20mA | 4-20 mA (CW/CCW Configurable) |
| Voltage Outputs (.625-8) | ±10VDC | 0-10 VDC (Short Resistant) |
| Accuracy (Linearity) | ± 0.5% (Standard) | Option .1 of ± 0.25% |
| Max. Rotation Speed | 3000 rpm (Ideal for dynamic monitoring) |
| Degree of Protection | IP65 (Shaft with sealed bearings) |
| Sampling Frequency | 800 Hz (Real-time response) |
| Temporary Stability | < 0.1% in 24 hours (German high-end) |
| Thermal Measurement Range | -20°C to +85°C |
| Thermal Drift | < 0.01% / ºC (Industrial thermal stability) |
| Environmental Resistance | Shock 250g SRS | Vibration 20g rms (50g peaks) |
| Nominal Starting Torque | < 1 Ncm at 1000 rpm (Low inertia) |
| Fixing System | SM906.620 Mounting Clamp (Set x3) |
Other products
