Heavy Duty Rotary Potentiometer IPX-7900

Budget-friendly price Request a quote
Ratiometric output to Ub | Ø 79 mm | Shaft Ø 13 mm or Ø 10 mm | Ub max. 42V | IP67 / IP6K9K | 120°, 200° or 350°, 1 or 2 channels

Novotechnik IPX-7900 rotary potentiometer. Conductive plastic potentiometer with anodized aluminum housing and stainless steel shaft.

Conductive plastic rotary potentiometer with ratiometric output at Ub. Ø 79 mm. Electrical range 120°, 200° or 350°, 1 or 2 channels; independent linearity ≤ ±0.1% (200° and 350°). Double bearing, shaft load 300 N. IP67 with M12 connector, IP6K9K with cable; -40 … +105 °C.

Key points

  • Absolute potentiometric measurement; continuous mechanical travel
  • 120°, 200° or 350°, in one or two channel versions
  • Life > 100 × 10⁶ moves; MTTF 429 years

Technical Frequently Asked Questions

What can be connected to the IPX-7900 rotary potentiometer?

It can be connected to Novotechnik M12 connectors and cables and Novotechnik rotary sensor couplings and accessories.

How do I order the IPX-7900 rotary potentiometer?

The order code has 7 fields: design/size, housing, shaft, channels, electrical angle, electrical version, and electrical connection. For example, IPX-7911-835-001-651 is the version with ø79 x 35 mm, housing centered on the shaft side, D13x12 mm steel shaft, redundant version, 350°, standard linearity, and two 4-pole M12 connectors. All order references with their corresponding part numbers are listed in the reference table on this page.

Under what conditions does the IPX-7900 rotary potentiometer operate?

Protection: IP67 with M12 connector output.

Properties

FeatureSpecification
Extent
Mechanical tour360°, continuous
Resistance tolerance±15 %
Repeatability0,002 % (0,007°)
Temperature coefficient of the output/applied voltage ratiotyp. 10 ppm/K
Exit signRatiometric to Ub
Electrical data
Maximum permissible applied voltage42 V
Recommended cursor current< 1 µA
Maximum cursor current in case of failure10 mA
Insulation resistance (500 VDC, 1 bar, 2 s)> 100 MΩ
Dielectric strength (50 Hz, 2 s, 1 bar, 500 VAC)≤ 1000 V RMS
Mechanical data
HousingAnodized aluminum AlMgSi1, resistant to salt spray
AxisStainless steel (no. 1.4305 / X10CrNiS18-9)
BearingsDouble bearing
Resistive elementConductive plastic
Cursorprecious metal multi-finger
Fixation4 M6 screws
Allowable load on the shaft, static or dynamic300 N
Maximum operating torque (*)4 Ncm
Maximum working speed50 min⁻¹
Weightapprox. 500 g
Environmental conditions
Operating and storage temperature-40 … +105 °C
Vibration IEC 60068-2-65 … 2000 Hz, Amax = 0.75 mm, amax = 5 g
IEC 60068-2-27 Shock50 g, 6 ms
Life> 100 × 10⁶ movements
MTTF429 years
ISO 20653 ProtectionIP67 with M12 connector output
ISO 20653 protection (cable)IP6K9K with cable exit
ReferenceConfiguration
IPX-7901-101-120-103IPX7901101120103Art. 400104337
IPX-7901-101-200-101IPX7901101200101Art. 400103972
IPX-7901-101-350-103IPX7901101350103Art. 400012011
IPX-7901-103-120-101IPX7901103120101Art. 400012007
IPX-7901-103-200-101IPX7901103200101Art. 400012008
Novotechnik IPX-7900 Heavy Duty Rotary Potentiometer
Dimensional drawing of the Novotechnik IPX-7900 heavy-duty rotary potentiometer

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Pinion with 13, 16, or 34 teeth or Ø8 shaft | Ø62 mm housing, without preload | 1 to 10,000 impedances/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft side | Max. frequency 60 kHz (100 options)
Dimetix_AG-1
It measures up to ~100 m over natural surfaces and up to 150 m with a reflector, with a typical accuracy of ±3 mm @2σ and a frequency of up to 100 Hz. It is geared towards position and level applications where ±1 mm accuracy is not required.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
2 cantilever metric casters | Wheels Ø79.8 mm | 1, 10 or 1000 mm/imp | NPN or push-pull | 5 V ±5 % or 12–24 V | IP52 shaft; IP65 wired output | Up to 180 kHz
NESA Environmental Meters
Dry and wet deposits | 2004/107/EC | Relay contacts | 220Vac or 20W solar panel | -30 ÷ +70°C | 750x550x330mm + 1m pole
Monitran-Logo
IEPE Triaxial Accelerometer Monitran MTN/2330 | ±80g | 10kHz | 100mV/g | IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 25 … 300 mm | Linearity ±0.05 … ±0.2 % | Repeatability 0.01 mm | Ø 16 mm | IP67 | Cable or connector M8
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen | 41.5 x 59 mm max. | 14-bit resolution | Shaftless: magnetic placeholder | 12/24 VDC (8 … 34 VDC) | IP67 / IP68 / IP69K | 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Low profile Ø68 mm | Servo clamp mounting | Ø6 h7 stainless steel shaft | 1 to 10000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V power supply | IP64 shaft, IP66 seal
Dimetix_AG-1
Extra Large Laser Reflection Sheet for Structural Customization Range: Extended extreme measurement scalability up to 500 meters
Shopping Basket