TDC-xx-x
TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g
- Manufacturer: DPF Sensors
- Category: Inclinometers, SENSORS
TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g
It has a built-in high-precision acceleration and gyroscope sensor and integrates the Carman filter algorithm, which can measure the real-time motion data of the object.
High-precision AD and gyro units are integrated inside, which can compensate for nonlinearity, orthogonal coupling, temperature drift and centrifugal acceleration in real time, greatly eliminate centrifugal error caused by motion acceleration interference, and improve the accuracy of dynamic measurement.
Properties
Other products
High-Performance Integrated Thermal Protective Enclosure (Air-Cooling Jacket) Range: Continuous forced cooling for foundries and high thermal stress environments
Power supply: 5V DC | Shaft diameter: 8mm Stainless steel | Weight: 570 grams | IP65 Standard output | Maximum PPR: 2500 | Frequency: 100 kHz | Temperature range: 0 to 70°C | Bearing life: 1.5×10^9 rev | Impact resistance: 50G | Push-Pull output: PRO
Cantilever wheel, C = 200 mm | Wheel Ø63.66 mm with preload | 1 to 5000 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
Process relay v/i. Digital setpoint with numerical preselectors
Customer's shaft and bearings | Housing Ø68 mm | 1 to 1250 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP00 shaft side (standard) | Up to 60 kHz
Electrochemical Technology | -10 °C to +150 °C (SIP) | Stainless Steel and PEEK | DIN/ISO Clamp Connection
Sin contacto: imán en eje hueco | Eje hueco Ø4, 5, 6, 8 o 10 mm | Carcasa 45×45 mm | 8192 pasos/vuelta (13 bits) | SSI (RS422), binario natural | Alimentación 5 V, 5–30 o 10–30 V | IP67 eje, 30000 rpm
Range 2mS to 20S, For use in line with SZ724 adapter and C565.2 or C7685 controller.
Transverse Inductive Measurement | 500 N·m | 21,000 RPM maximum | Strict PCD flange 84.0 mm | Overall resolution 0.02% | Ultra-low inertia 0.0017 kg·m²
Isolator for passive pickups. Passive output: 4/20 mA, input: 4/20 mA (for passive pickup)