PMP-S10HT
Budget-friendly price Request a quote
PMP-S10HT Contactless Inclination Sensor
- Category: Inclinometers, SENSORS
Non-contact tilt sensor
Properties
Range: ±5 / 10 / 20 / 30º
Axles: 1
5.0 Vdc power supply
Sensitivity 0.02°
Temperature compensated
SOutput signal 0.5…4.5 Vdc
Precision: 0.2º
Linearity: 1%
REPLACES OBSOLETE MODELS:
MIDORI PMP-S10LX and PMP-S10TX
Related documentation, cases, and guides
Other products
Adjustable industrial thermostat.
Range 2mS to 20S, For use in line with DIN11851 connector and C565.2 or C7685 controller.
Square flange □63.5, shaft Ø9.52 h7 | Up to 1024 steps (10 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP54 shaft (IP65 sealed) | Gray or Excess
NCTE Rotary Torque Sensor | 4000 Series | 1,000 Nm | 5,000-10,000 RPM
Biaxial ultrasonic anemometer with no moving parts for measuring wind speed and direction. Range 0-60 m/s, resolution <0.01 m/s, output 4-20 mA or RS485 Modbus.
Shaft Ø8 h7 | 80 mm square flange | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z-seal) | Max. frequency 60 kHz
Spindle Ø12 h7, optional Ø10, 12.7 or 14 | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | Power supply 10–30 V | IP66 spindle (IP67 sealed) | Max. load 15 kg radial/axial
Analog voltage output | Shaft Ø 6 mm | 3 M4 threaded holes | Max. Ub 42 V | IP40 | 3, 5 or 10 turns
