TSM-xx
Precision tilt sensor with ranges from ±1…90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º
- Manufacturer: DPF Sensors
- Category: Inclinometers, SENSORS
Tilt sensor with ranges from ±1…90º, 2 axes, output signal 4-20mA / 0-5 Vdc / 0.5-4.5 Vdc / 0-10 Vdc / RS485 / CanBus, power supply 9…36 Vdc, environmental protection IP67, working temperature -40…+85ºC, MTBF 10 years, ACCURACY: ±0.005º, RESOLUTION: 0.001º
Properties
Other products
Linear Range 0-12mm | Sensitivity 1.0mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M30 x 1.5 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable
Inductive Transducer | Limit 5,000 N·m | 15,000 RPM | PCD Flange 155.5 mm | Accuracy 0.02% | Inertia 0.0167 kg·m²
Ø100 mm flange with servo mounting | 2²⁴ resolution in 4096 revolutions | Gray / Binary / BCD codes | Parallel or SSI interface | 5 V / 8–24 V / 18–28 V power supply | Ø12 h7 stainless steel shaft | Max. load 10 kg | IP64 shaft side (IP65 sealed) | 4000 rpm continuous | Weight 2500 g
Very robust Ø59 mm | Through-hole shaft Ø6–15 mm | Anti-rotation pin Ø5 mm | Max. frequency 100 kHz (300 kHz optional) | 1 to 3600 imp/v | Anodized aluminum base and Valox 420 cover | Weight 300 g | IP64 on the shaft side (IP65 sealed) | NPN, PNP, push-pull, line driver, TTL and 1 Vpp sinusoidal outputs | IP65 radial cable or IP67 connector
Generator – simulator of PROCESS electrical signals.
Resolution up to 65536 steps/revolution (16-bit) | Shock resistance 50 G (11 ms) | SSI interface with preset · Gray or Binary | Sine/Cosine output 1024 ppr or RS422 up to 16384 ppr | Power supply 10–30 V · max. consumption 200 mA | B10 flanged housing | Ø11 h7 stainless steel spindle | Spindle-side protection IP64 (IP66 sealed) | Max. continuous speed 6000 rpm (3000 rpm sealed) | Operating temperature -20…+85 °C
Cylindrical housing Ø90 mm | 92 mm square flange | Front centering Ø80 h7 | Solid shaft Ø10 h7 made of stainless steel | 1 to 90,000 pulses/revolution | Max. frequency 100 kHz (1000 kHz optional) | Power supply 5 to 30 V | 12 electronic output options | Protection up to IP66 | Weight 600 g
Conductivity ranges from 10mS to 2,000mS 4/20mA output
Miniature Ø48 mm | Internal helical coupling | Hollow shaft Ø4 to Ø8 mm in Ergal | Electrical and mechanical zero alignment | 1 to 2540 imp/v | Max. frequency 60 kHz (75 or 100 kHz optional) | Anodized aluminum | Weight 180 g | 6000 rpm continuous (3000 rpm with Z option) | NPN, PNP, Push-pull and Line Driver outputs
Relay Output | Adjustable Alarm Limit | Configurable Time Delay | IP67 Protection | Robust Aluminum Housing | Remote Reset | 24V DC/AC Power Supply | Temperature -20 to 80°C | Surface Mounting