TCA-xxx
Inclinometer with RS485 output, temperature-compensated, high precision. 1 or 2 axes. Temperature-compensated.
- Manufacturer: DPF Sensors
- Category: Inclinometers, SENSORS
Inclinometer with RS485 output, temperature-compensated, high precision. 1 or 2 axes.
24-bit converter, RS485 modBus communication, full scale accuracy 0.01°, ranges ±10 to ±180°.
Different mounting modes, ranges and special mounts.
A standard in precise solar trackers.
Properties
Other products
Square flange 63.5 mm | Stainless steel shaft Ø9.52 h7 | Front centering Ø31.75 h7 | Composite base and Valox 420 | 1 to 1024 pulses/revolution | Max. frequency 60 kHz | Power supply 5÷30 V | Shaft load up to 3 kg | Weight 155 g | Operating temperature 0 … +60 °C
Aluminum housing Ø58 mm with servo-type mounting | CANopen / CAN (C2) or fiber optic CAN (CF) interface | Max. transmission speed 1 MBaud | Max. resolution 16 bits/revolution · 30 bits in 16384 revolutions | Binary output code | Power supply 10–30 V DC, max. consumption 2.5 W | Ø10 h8 shaft in stainless steel (Ø6 optional) | Max. radial/axial load 40/110 N | IP64 protection on shaft (IP66 sealed) | Operating temperature -40 … +85 °C
4 Pt100 sensor controller with 2 alarms per relay
Electrochemical Technology | VARIVENT® Connection | -10 °C to +150 °C (SIP) | Stainless Steel and PEEK
Variable AC current sinusoidal benchtop generator. 0/5A (AC) 50Hz
Very robust, Ø59 mm | Through shaft Ø15, Ø16 or Ø20 mm | Internal tangential coupling | Axial compensation ±0.2 mm and radial compensation ±0.05 mm | Max. frequency 100 kHz (300 kHz optional) | Resolution 1 to 3600 imp/v | Aluminum base and anodized aluminum cover | Weight 340 g | IP64 on the shaft side (IP65 sealed) | NPN, PNP, push-pull, TTL and line driver outputs
Hollow shaft Ø10 H7 (opt. Ø6, Ø8, Ø9.52) | Internal star coupling | SSI serial interface (RS422) | Resolution up to 30 bits in 16384 turns | Gray or Binary codes | Power supply 10–30 VDC | IP65 protection (IP66 sealed shaft) | Step frequency 800 kHz | Weight 1400 g | Max. radial/axial load 70/110 N
LVDT with Electronics | Square Body 30×30 mm | Stroke 100 mm and 200 mm | Output 4-20mA / ±10V | IP67 Protection | Frequency 800 Hz | PCD Mounting 40.0 mm
Hollow shaft Ø10 H7 with internal star coupling | DeviceNet interface with CAN transceiver (ISO 11898) | Programmable transmission speed | Max. resolution 16 bits/revolution · 30 bits in 16384 revolutions | Binary output code | Power supply 10–30 V DC, max. consumption 2.5 W | Coupling compensation ±3 mm axial, ±0.05 mm radial, ±2° angular | Max. radial/axial load 70/110 N | IP65 protection on shaft (IP66 sealed) | Operating temperature -40 … +85 °C