SMF
Flush diaphragm pressure transducer (supply)
- Manufacturer: DPF Sensors
- Category: Pressure, SENSORS
Pressure sensor used in food, chemicals and high-density products.
Properties
 | 0…0.6 bar to 0…200 bar |
|---|---|
| -30…100°C medium temperature |
| 0.50 % precision |
| Output signal 4…20 mA, 0…10 Vdc, 0.5..4.5 Vdc, 1…5 Vdc |
| Absolute or relative pressure. |
| 1/2″ flush thread |
Other products
Housing Ø56 mm | Anodized aluminum | Front centering Ø20 h7 | Solid shaft Ø6.35 h7 | 1 to 600 pulses/revolution | Max. frequency 40 kHz | Power supply 5÷30 V | Protection IP64 / IP66 | Weight 180 g | Operating temperature 0 … +70 °C
Ethernet to RS485 Modbus RTU/TCP-IP Multi-Client Isolator Converter
Linear Range 0-12mm | Sensitivity 1.0mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M30 x 1.5 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable
Hollow shaft Ø6÷15 H7 | Tangential coupling | Housing Ø59 mm | Aluminum and Valox base | 1 to 3600 pulses/revolution | Max. frequency 100 kHz | Power supply 5÷30 V | IP65 / IP66 protection | Weight 290 g | Operating temperature 0 … +60 °C
Linear Range 0-8.5mm | Sensitivity 1.33mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M18 x 1 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable
NCTE S-BB-R Torque Sensor for E-Bikes and Pedelecs | Maximum Precision
Antimony combined reference pH electrode with epoxy body, size 75x12. with 9m cable for the galvanic industry.
Controller – universal panel indicator 32 x 74 Dual display, PT100 input, Thermocouple, V, I, mV
Inductive toroidal conductivity probe with 4-20 mA output and RS485 Modbus RTU. Configurable ranges from 4 to 2,000 mS/cm and TDS up to 1,000 ppt.
Hollow shaft H7 from Ø12 to Ø16 mm | Torque or pivot support | Housing Ø104 mm | 100 to 2048 pulses/revolution | Max. frequency 120 kHz | Power supply 5–30 V | Operating temp. -20 … +85 °C | IP65 shaft side (IP66 sealed) | 6000 rpm continuous | ATEX 3 · CE Ex II 3GD