DPSX9I

High-Speed Telemetry (Optical) | Range 50 – 100 N·m | Peak 40,000 RPM | Dual PCD Flange 66.0/44.0 mm | Inertia 0.0003 kg·m²

Housing Ø80, shaft Ø8 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Gray, Binary, Excess or BCD

Dimetix Field Gateway Module for Transparent Laser Integration Range: Simultaneous control of up to 10 devices with ultra-fast 12 Mbaud transmissions

Aseptic Optical Telemetry | 60,000 N·m | Heavy Duty | PCD flange 369.0 mm | Inertia 1.6378 kg·m²

Section 18×54 mm | Stroke 70–2440 mm | Resolution 5, 1 and 0.5 µm (x4) | Line driver output (VD) | Power supply 5 V ±5 % | IP53 (IP64 with compressed air) | Accuracy ±10 µm (opt. ±5 µm)

Temperature, humidity and/or atmospheric pressure sensor

Hollow through shaft H7 up to Ø15 | Ø59, anti-rotation pin | Up to 8192 steps (13 bits) | Parallel NPN open collector | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP65 sealed) | Gray code only

The BPSE load cell, used to measure compressive forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.

Salida incremental | Mando Ø80 mm | 100 imp/vuelta con enclavamiento | Salidas NPN y driver 26LS31 | Alimentación 5 V o 15–24 V | IP50 lado eje | Bornas Phoenix MS (IP00), axial

4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC