TPD710
Budget-friendly price Request a quote
Differential pressure transmitter. Measuring range up to 3 MPa (30 Bar)
- Manufacturer: DPF Sensors
- Category: Pressure, SENSORS
Transmisor de presión diferencial. Rango de medida hasta 3MPa (30 Bar), ratio 100:1, precisión 0,075%FE, salida RS485 y 4-20 mA Hart. Con display LCD de alta visibilidad. Soporta presión estática hasta los 250 Bar
Properties

Related documentation, cases, and guides
Technical documentation
- Absolute vacuum measurement: types of vacuum gauges and principles
- Pressure unit conversion table: Atm, psi, bar and kPa
- Load cells and strain gauges: types and operation
- CO2, VOC and humidity sensors DPF Sensors: model catalog
- DPF Sensors humidity and temperature sensors: overview by model
- Humidity sensors: types, principles and applications
Other products

Ø65 mm, shaft Ø10 h7 | Up to 2²⁴ steps in 4096 turns | Gray or binary | Parallel NPN 70 mA or SSI RS422 | Power supply 5 ±5 %, 8–24 or 18–28 V | IP64 shaft (IP65 sealed) | Max. radial/axial load 8 kg

2-way universal galvanic isolator/converter. 0/70mV (DC), 0-4/20mA output (Active/Passive) automatic, Power supply: 10…30 VDC

4-20mA | 0-5 m/s · -20-80 °C | Omnidirectional hot wire | 120 x 80 mm control unit | 12Vdc | IP65

Ultrasonic level sensor, range up to 10 meters, RS485/4-20 mA/0-5 Vdc output signal.

Dual Inductive Metrology | Limit 500 N·m | 21,000 RPM | PCD Flange 84.0 mm | Accuracy 0.04% | Inertia 0.0017 kg·m²

Ethernet to RS485 Modbus RTU/TCP-IP Multi-Client Isolator Converter

Square flange 44×44 mm, shaft Ø6 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP66 shaft (IP53 with low torque) | Max. frequency 500 kHz | Impacts 100 G (6 ms)

Hollow shaft Ø4–10 mm | Housing Ø46.5 mm | 1 to 2540 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP53 shaft side | Helical, electrical zero alignment

It measures up to ~100 m over natural surfaces and up to 150 m with a reflector, with a typical accuracy of ±3 mm @2σ and a frequency of up to 100 Hz. It is geared towards position and level applications where ±1 mm accuracy is not required.