Atmospheric pressure sensor at sea level BAR-QNH

Budget-friendly price Request a quote
500–1100 hPa | Automatic QNH Calculation | 0.4 hPa @ 20°C | Piezoresistive Bridge | RS485 Digital | 10–30 Vdc | IP65 Plastic Enclosure

The NESA BAR-QNH is an electronic barometer with an internal circuit for the automatic calculation of QNH, a fundamental parameter in the airport environment. Typical measurement range 500–1100 hPa, sensitivity 0.05 hPa, and accuracy 0.4 hPa @ 20°C, with a piezoresistive bridge transducer.

RS485 digital output and 10-30Vdc power supply, <0.12W consumption. IP65 plastic enclosure, compliant with WMO and CE standards. Typical applications: AWOS stations, airport meteorology, general aviation, and navigation.

Key points

  • Typical measurement range 500÷1100 hPa; sensitivity 0.05 hPa; accuracy 0.4 hPa @ 20°C; response time < 2 s
  • Piezoresistive bridge transducer; automatic calculation of QNH
  • Standard digital RS485 output signal; RS485/USB interface for field programming of altitude above sea level
  • Power supply 10÷30Vdc; consumption <0.12W; protections against reverse polarity and transients
  • -40 to +60°C; IP65 plastic container; 295g
  • Calibrado y verificado por comparación con un instrumento patrón certificado como patrón primario de la WMO, con certificado de calibración

Technical Frequently Asked Questions

What's the way out?

Standard digital RS485 output signal. It also has an RS485/USB interface for field programming of altitude above sea level.

How do you calibrate it?

Cada sensor se calibra y verifica por comparación con un instrumento patrón certificado como patrón primario de la WMO, y se suministra con certificado de calibración.

What applications is it used for?

AWOS stations, airport meteorology, general aviation and navigation.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeAtmospheric pressure at sea level
Typical measurement range500÷1100 hPa
Sensitivity0.05 hPa
Precision0.4 hPa @ 20°C
Response time< 2 s
Transducer typePiezoresistive
Measurement principlepiezoresistive bridge transducer
Calculation of QNHAutomatic, with internal circuit
CalibrationCada sensor se calibra y verifica por comparación con un instrumento patrón certificado como patrón primario de la WMO
Calibration certificateIt is supplied with the sensor.
Regulatory complianceEC
StandardsWMO
Exit signals
Standard exit signDigital RS485
InterfaceRS485/USB, for field programming of altitude above sea level
Power supply, environment, and mechanical data
Feeding10÷30Vdc
Consumption<0.12W
Current consumption<2mA
ProtectionsPolarity reversal and transients
Operating conditions-40 to +60°C
ContainerIP65 Plastic
Weight295g
NESA BAR-QNH Sea Level Atmospheric Pressure Sensor
Dimensions of the NESA BAR-QNH sea level atmospheric pressure sensor

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive, non-contact | CANopen DS-406 | Stroke 50 … 2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC (8 … 34 VDC) | 350 bar · IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange 92 mm | Ø90 mm, hollow shaft Ø20 H6 | 9000–900000 imp/rev | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 shaft (IP65 output with cable) | ±5″; 2200 kHz with interpolation
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
PROFIBUS-DP Class 2, 12 Mbaud | B10 flange, Ø11 h7 shaft | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP65 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-hole shaft Ø50 H7 | Ø170 mm, tangential coupling | 18000–900000 impedances/revolution | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 shaft (IP65 wired output) | ±2.5″; 2200 kHz with interpolation
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
PROFIBUS-DP Class 2, 12 Mbaud | Housing Ø58 mm, servo mounting | Shaft Ø10 h8 (Ø6 optional) | 16 bit; 30 bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
Monitran-Logo
Para las versiones con conector del acelerómetro 1186 | Toma 62GB de 3 pines a extremos libres | PVC de cuatro conductores más pantalla con sobremalla | 5 m
NESA Environmental Meters
4-wire Pt100 | -40 ÷ +60 °C | Pt100 1/3DIN (±0.1 °C @ 0 °C) | 30 x 10 x 5 mm | Operation -60 ÷ +100 °C | IP66
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø10 H7, optional Ø6, 8 or 9.52 | Up to 65536 steps × 16384 revolutions | SSI (RS422), optional preset | 10–30 V power supply | IP65 shaft (IP66 sealed) | Star coupling, ±3 mm ax. | Gray code or binary
Shopping Basket