PSX Hydrostatic Level Sensor
LEVEL MEASUREMENT by hydrostatic pressure
- Manufacturer: DPF Sensors
- Category: Pressure, SENSORS
Measurement of liquid level by hydrostatic pressure in wells, tanks, ponds, optionally with ATEX certificate.
Properties
 | 0..1 to 0…250 meters of water column |
|---|---|
| -10…60°C medium temperature |
| 0.25 % precision BFSL |
| Output signal 4…20 mA |
| Atmospheric pressure compensated by vent pipe |
| Explosion-proof certified for zone 0 II 1G Ex ia IIB T4 / Zone 1 II 2G Ex ia IIC T4 |
Other products
Housing Ø65, shaft Ø10 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
CAN SAE J1939 | Ø 36 mm | 16 bits por vuelta | Eje Ø 6 mm, Ø 10 mm o hueco Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP67 / IP69K | Rango de medida: 44 vueltas (15840°)
4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC
M12x1 código A | 4, 5 y 8 pines | IP67
DC-DC Converter, Regulator Isolator. 12 to 24 Vdc
Hilo Ø 0,51 mm | Carrera 750 o 1500 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Opción incremental (I) | Alim. 5, 12 o 24 V ±5 % | Linealidad ±0,25 % f.s. | IP54
Hilo Ø 0,5 mm, 10 m/s | Carrera hasta 1500 mm | Incremental, resolución 0,1 o 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V o pot. 1 kΩ | Alim. 5, 12, 24 V ±5 % o 8–30 V | IP64 codificador (mecánica IP43)
Fijación tipo servo Ø90 | Centrados Ø80 h7 y Ø40 h7 | Eje Ø12 h7 acero inoxidable | 1 a 3600 imp/vuelta | NPN, push-pull, line driver, TTL | Alimentación 5–30 V | IP65 eje (IP66 con sellado Z)
Vibrating wire piezometer for pore pressure (interstitial water pressure) and groundwater level | Ranges 0.2 to 10 MPa | Accuracy ±0.25 % FS