SMC
Digital pressure transducer
- Manufacturer: DPF Sensors
- Category: Pressure, SENSORS
General purpose pressure sensor, communication via CAN BUS.
Properties
 | 0…1 bar to 0…2000 bar |
|---|---|
| -40…125°C medium temperature |
| 0.5 % accuracy |
| CAN-OPEN Protocol |
| Absolute or relative pressure. |
| 1/4″ Gas Thread |
Other products
Hollow shaft Ø10 H7 with internal star coupling | CANopen / CAN or CAN fiber optic interface | Max. transmission speed 1 Mbaud | Max. resolution 16 bits/revolution · 30 bits in 16384 revolutions | Binary output code | Power supply 10–30 V DC, max. consumption 2.5 W | Coupling compensation ±3 mm axial, ±0.05 mm radial, ±2° angular | Max. radial/axial load 70/110 N | IP65 protection on shaft (IP66 sealed) | Operating temperature -40 … +85 °C
Power supply 5-30V DC | Shaft Ø4-8mm Ergal | Weight 95g | Maximum load 0.5kg | Continuous RPM >6000 | Starting torque 15gcm | Bearing life 1.5×10^9 rev | Impact resistance 50G | Operating temperature 0-70°C | Protection IP65
100% Digital Optical | 50 – 1,000 N·m | 30,000 RPM | Titanium Rotor
B10 flange Ø115 mm | Resolution up to 8192 steps/revolution (13-bit) | Gray, Binary, Excess, and BCD codes | Parallel, SSI, or analog output (mA/V) | Power supply: 5 V, 15 V, 8–24 V, 18–28 V, or 10–30 V | Ø11 h7 stainless steel spindle | Max. radial/axial load: 18 kg | Shaft-side protection: IP66 (IP67 sealed) | Max. continuous speed: 6000 rpm (3000 rpm sealed) | Operating temperature: 0…+70 °C
Change Analysis | ±200 N (Optional 500 N) | ±125 mm (Optional 150 mm) | 400 kHz Sampling | 8 Channels
Potentiometric linear displacement sensor with articulated mounting, travels from 10 to 300 mm and IP54
Dimetix Field Gateway Module for Transparent Laser Integration Range: Simultaneous control of up to 10 devices with ultra-fast 12 Mbaud transmissions
Up to ~100 m over natural surfaces, 500 m with reflector, ±3 mm @2σ, 100 Hz and operating from -10 to +60 °C.
4/20mA RTD Isolator-Duplicator (Active/Passive)