SIL
Industrial LOW pressure transducer
- Manufacturer: DPF Sensors
- Category: Pressure, SENSORS
Low pressure sensor for gases and liquids.
Properties
 | 0…10 mbar to 0…40 bar |
|---|---|
| -40…85°C medium temperature |
| 1 % precision |
| Output signal 4…20 mA, 0…10 Vdc, 1…5 Vdc |
| 1/4″ – 1/2″ thread and special ones. |
| Absolute or relative pressure. |
Other products
Transverse Inductive Measurement | 500 N·m | 21,000 RPM maximum | Strict PCD flange 84.0 mm | Overall resolution 0.02% | Ultra-low inertia 0.0017 kg·m²
Isolator for passive pickups. Passive output: 4/20 mA, input: 4/20 mA (for passive pickup) * 4 channels *
Outer diameter Ø36.5 mm | Mounting via servo-type flange or front screws | 12-bit single-turn (4096 steps/rotation) | Multi-turn up to 25-bit (8192 rotations) | Synchronous serial output SSI, line driver via RS422 | Clock frequency from 100 kHz to 2 MHz | Stainless steel shaft Ø6 h6 | Maximum continuous speed of 12000 rpm | IP64 on the shaft side; temperature from -30 to +85 °C | Power supply from 10 to 30 VDC
Ø72 mm | Hollow shaft Ø10 to Ø20 mm | Max. axial compensation ±3 mm | Max. radial compensation ±0.05 mm | Max. angular compensation ±2° | Max. frequency 100 kHz (300 kHz optional) | 1 to 25000 imp/v | Anodized aluminum base and Valox 420 cover | Weight 470 g | IP64 on the shaft side (IP66 sealed)
Conductivity range from 0 to 20 mS/cm. Output 4/20mA
2-way universal galvanic isolator/converter. Programmable input ranges (0/10 to 1000V), automatic 0-4/20mA output (active/passive). Power supply: 10 to 30 VDC.
Linear potentiometer with movable feet | Stroke 10–450 mm | Linearity ±0.05 % to ±0.3 % | 1 kΩ / 5 kΩ | IP40 / IP65 | Cable or connector C193
ATEX Ex d IIC T6 Gb certified | B10 flange (Ø115) with Ø85 h7 centering | Aluminum housing | Single-turn 7 to 12-bit | Up to 4096 steps per revolution | Ø10 h7 stainless steel shaft | Parallel, SSI serial (RS422) or analog output | IP65 standard and IP66 on the shaft with Z option | Max. radial/axial load 10 kg | Power supply 5 V, 15 V, 8–24 V or 18–28 V
4-20mA DC Output | Range 0-10 to 0-100 mm/s | RMS Speed Measurement | Frequency 2Hz-1kHz | Power Supply 12-32V DC | Temperature -25 to 90°C | IP67 Protection | Stainless Steel | Insulated Base | Configurable Connection
Square flange 63.5 mm | Stainless steel shaft Ø9.52 h7 | Front centering Ø31.75 h7 | Composite base and Valox 420 | 1 to 1024 pulses/revolution | Max. frequency 60 kHz | Power supply 5÷30 V | Shaft load up to 3 kg | Weight 155 g | Operating temperature 0 … +60 °C