SA8x6x

Multiparameter probe
Equipped with 6 sensors: Level, conductivity, temperature, pH, redox, dissolved oxygen (turbidity option). With or without recorder, RS485-ModBus signal, level of 20 or 350 meters.

Properties

SA 8060.101Recorder, level 20 m., power supply battery
SA 8060.104Recorder, level 350 m. , alim. battery
SA 8065.101Communication, level 20 m., external power supply.
SA 8065.104Communication, level 350 m., outside power supply.
SA 8265.106Communication, level 20 m., external supply, atmospheric comp.

Other products

B&C ELECTRONICS Logo 2026 WATER QUALITY
Graphite sensor with built-in NTC10K, 3m cable, K=1 cm⁻¹Range from 2MicroSiemens to 2,000 milliSiemens,
LOGO TORQUE CERTIFICATION
Inductive Telemetry (iS) | 100 – 1,000 N·m | 15,000 RPM | Inertia 0.0007 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Diameter 30-50mm | Max. Load 15kg | Weight 950g | Bearing Life 1.5×10^9 revs | Impact Resistance 50G | Temperature 0-70°C | Pulses/Rev 1-3600 | Max. Frequency 100kHz | Power Supply 5-30V | IP65 Protection
RS485 humidity and temperature sensor
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø58 mm | Resolution up to 1024 steps/revolution (10-bit) | Gray and Excess codes | Parallel, SSI, or analog output (mA/V) | Power supply 5 V, 15 V, 8–24 V, 18–28 V, or 10–30 V | Spindle Ø10 h7 stainless steel | Max. radial/axial load 2 kg | Spindle-side protection IP54 (IP65 sealed) | Max. continuous speed 6000 rpm (3000 rpm sealed) | Operating temperature 0…+60 °C
LOGO TORQUE CERTIFICATION
Light Telemetry (eS Series) | Flexible Range 50 – 100 N·m | Peak 25,000 RPM | PCD Flange 101.5 mm | Inertia 0.00210 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Metal housing Ø58 mm | Servo flange | Ø6 h7 stainless steel shaft | 1 to 25,000 pulses/revolution | Max. frequency 100 kHz | Power supply 5–30 V | Outputs NPN, PNP, push-pull, drivers, TTL and sinusoidal | IP64 shaft side (IP66 sealed) | 8,000 rpm continuous | Weight 300 g
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Cylindrical housing Ø90 mm | Front centering Ø80 h7 | Through hollow shaft Ø16 to Ø30 mm | Anti-rotation pin | 1 to 36000 pulses/revolution | Max. frequency 100 kHz (500 kHz optional) | Power supply 5 to 30 V | 11 electronic outputs available | IP65 protection | Weight 750 g
Shopping Basket