WMP4 Multiparameter Probe

Budget-friendly price Request a quote
4 default parameters | pH 0÷14 | Level 0÷20 m | -5 ÷ +60 °C | RS485 | 10.8 ÷ 16Vdc | 512×42mm

The NESA WMP4 is a multiparameter probe developed for monitoring aquifers, rivers, lakes, landfills, wastewater treatment plants, and clear water. The parameters that can be measured include piezometric level, temperature, conductivity, and pH, using four independent electrodes, each calibrated separately and managed by dedicated electronics.

pH 0–14, level 0–20 m, temperature -5–+60 °C and conductivity 0–6000 µS (0–60000 µS auto-ranging). RS485 interface (IS485/USB module), 10.8–16 Vdc power supply and standard 30 m cable with barometric compensation.

Key points

  • Default parameters: pH, level, temperature, and conductivity; configurable combinations: level/temperature/conductivity/pH, level/temperature/conductivity, and level/temperature
  • pH 0÷14; level 0÷20 m; temperature -5 ÷ +60 °C; conductivity 0÷6000 µS (0÷60000 µS autoranging)
  • RS485 interface; IS485/USB module; isolated data interface; Probe-Web software; TMF100 or TMF500 datalogger
  • Power supply 10.8 ÷ 16Vdc, max. consumption 30mA @ 12Vdc; max. 3 bar
  • Standard 30m cable with barometric compensation; IP68 connector or ferrules
  • PVC; 512x42mm; < 2000g; CE

Technical Frequently Asked Questions

What parameter combinations does it support?

Level / Temperature / Conductivity / pH, Level / Temperature / Conductivity and Level / Temperature.

What ranges does it have?

pH 0÷14, level 0÷20 m, temperature -5 ÷ +60 °C and conductivity 0÷6000 µS (0÷60000 µS autoranging).

What kind of interface does it have?

RS485, with isolated data interface. The USB module is the IS485/USB.

Properties

FeatureSpecification
Measurement and operating principle
Probe typeMultiparameter probe
ElectrodesFour independent ones, each calibrated separately and managed by specific electronics
Type of waterClear or semi-cloudy
Surface or aquifer waterSweet or savory
Operational depthUp to 20 m, depending on the model
Regulatory complianceEC
Measurable parameters
Default parameters4
pH0÷14
Level0÷20 m
Temperature-5 to +60 °C
Conductivity0÷6000 µS
Conductivity (autorang)0÷60000 µS
Configurable combination 1Level / Temperature / Conductivity / pH
Configurable combination 2Level / Temperature / Conductivity
Configurable combination 3Level / Temperature
Output signals and interface
InterfaceRS485
USB ModuleIS485/USB
ProtectionsIsolated data interface
SoftwareWeb application Probe-Web
DataloggerTMF100 or TMF500, via GSM, GPRS, UMTS or satellite
Probes by TMF dataloggerUp to 10
Data readingIn real time
Data storageLocal
Data transferTo a collection center
Standard cable30 m with barometric compensation
Cable terminationIP68 connector or ferrules
Power supply, environment, and mechanical data
Supply voltage10.8 ÷ 16Vdc
Current consumptionMax. 30mA @ 12Vdc
Operating temperature-5 to +60°C
Operating pressureMax. 3 bar
MaterialPVC
Dimensions512x42mm
Weight< 2000g
NESA WMP4 Multiparameter Probe
Dimensions of the NESA WMP4 multiparameter probe

Other products

Dimetix_AG-1
High-Speed Communication (500 Hz / 2 ms) with IP65 Industrial Protection: Synchronous Real-Time Data Transfer for Critical Processes
DPF Sensors logo
Digital pressure transducer
DPF Sensors logo
Miniature size wire displacement sensor, ranges from 100 to 350 mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive, non-contact | Voltage or 4…20 mA output | Stroke 50…2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC or 24 VDC | 350 bar · IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø65 mm, Ø10 h7 spindle | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP65 spindle (IP66 sealed) | Optional spindle Ø6, 8, 9.52, 11 or 12
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □63.5, shaft Ø9.52 h7 | Up to 1024 steps (10 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP54 shaft (IP65 sealed) | Gray or Excess
Monitran-Logo
LVDT presurizado de CA o CC | PE: ±25 a ±500 mm, brida y salida radial | PES-2: ±25 a ±300 mm, rosca 1 5/8″-12UN-2A y salida axial | No linealidad ±0,5% | Conector MS de 6 pines IP55
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | CANopen DS-406 | Stroke 50 … 4250 mm | Resolution 1 or 5 µm | 1 or 2 position markers | 13 … 34 VDC | 350 bar · IP67 / IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–10 mm | Housing Ø46.5 mm | 1 to 2540 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP53 shaft side | Helical, electrical zero alignment
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–8 mm | Housing Ø48 mm | 1 to 2540 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Helical, optional flanges
Shopping Basket