SZ3300.1 conductivity sensor

Conductivity sensor range -5 to 85ºC, K=1

Manufacturer: B&C Electronics
Category: Water quality, SENSORS, Conductivity Sensors

The B&C Electronics SZ 3300.1 conductivity sensor is a reliable and accurate solution for conductivity measurement in industrial and environmental processes. Its dual-graphite electrode design provides stable, interference-free readings in continuous flow applications.

Made of chemical-resistant PES, this sensor is designed for pipe installation using a ¾" MNPT connection. It incorporates a Pt100 temperature sensor, which compensates for thermal changes and ensures accurate measurements within a range of -5°C to 85°C.

The SZ 3300.1 is compatible with various conductivity controllers and supports a maximum pressure of 10 bar at 25°C, making it ideal for applications in water treatment, industrial processes, and environmental monitoring.

Properties

Type of measurement

In flow (in flow)

Electrodes

2 electrodes of graphite

Temperature sensor

Pt100, 2 wires

Cell constant (K)

K = 1

Temperature range

-5°C to 85°C

Maximum pressure

10 bar at 25 °C

Body material

PES (chemical resistant)

Process connection

¾” MNPT

Total length

79 mm (including thread)

Other products

Linear LVDT with Integrated Electronics SM40 Series

LVDT with Electronics | Stroke 20 mm to 360 mm | IP67/IP68 Protection | Output 4-20mA / ±10V | Housing Ø 25 mm | Frequency 800 Hz | PCD Mounting 30.0 mm

Displacement, Amplified LVDTs, SENSORS, LVDT Sensors

VPAL

Differential pressure transducer for air and liquids

Pressure, SENSORS

Dimetix DAN-10-150 Laser Distance Sensor

Industrial laser sensor for measuring up to ~100 m directly on natural surfaces and up to 150 m with reflector, with ±1 mm @2σ and up to 100 Hz.

Displacement, SENSORS, Laser distance sensors, Level Sensors

Robust Incremental Encoder I/68LL

Carcasa aluminio Ø68 mm | Fijación frontal y trasera | Eje Ø10 g6 inoxidable | 1 a 25000 imp/vuelta | NPN, PNP, push-pull, driver, 1 Vpp | Alimentación 5–30 V | IP65 eje (IP66 sellado)

Encoder, Incremental Encoder, Robust Incremental Encoder

I/41Q Miniature Incremental Encoder

41 mm square flange | Shaft Ø6.35 h7, centered Ø13.89 h7 | 1–2540 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)

Encoder, Incremental Encoder, Miniature Incremental Encoder, SENSORS

Low Cost Incremental Encoder I/63TE

Eje Ø10 h7 | Brida cuadrada 63,5 mm | 1 a 1024 imp/vuelta | NPN, PNP, push-pull o driver | Alimentación 5–30 V | IP65 eje (IP66 sellado Z) | 60 kHz (100 kHz opcional)

Encoder, Incremental Encoder, Low Cost Incremental Encoder, SENSORS

INME ECO clean water level float

Level float for automatic filling and emptying control

SENSORS, Level Sensors

I/44Q Miniature Incremental Encoder

44 mm square flange | Shaft Ø6 h7, centered Ø20 h7 | 1–2540 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP66 shaft (IP53 under torque) | 60 kHz (100 kHz optional)

Encoder, Incremental Encoder, Miniature Incremental Encoder, SENSORS

Single-turn Absolute Encoder A/358H

Housing Ø58, shaft Ø10 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed) | Gray, Binary, Excess or BCD

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS

SKE

HIGH temperature transducer

Pressure, SENSORS