TU8182 Turbidimeter

Self-cleaning turbidimeter, Measuring range 0-4,000/40,00/400,0/4,000 NTU

Manufacturer: B&C Electronics
Category: Water quality, SENSORS, Turbidity Sensors

The B&C Electronics TU8182 turbidimeter is a high-precision device designed for turbidity measurement in submersible applications, complying with ISO 7027 – EN 27027. Its nephelometric technology with 890 nm infrared LED allows for stable readings without color interference or variations in ambient light, guaranteeing reliable measurements in demanding environments.

Made with a chemical-resistant PVC body, the TU 8182 is designed to be submerged in tanks, ponds, rivers, or wastewater treatment plants. It also features a self-cleaning system with a compressed air nozzle, reducing dirt buildup and minimizing maintenance requirements.

This sensor features an integrated preamplifier, IP68 protection for total immersion, and an output signal compatible with the TU 7685 controller, allowing for easy integration into continuous water quality monitoring systems.

Properties

Measurement method	Nephelometric (ISO 7027 – EN 27027)
Compatibility	B&C Electronics TU 7685 Controller
Measuring ranges	0-4/40/400/4,000NTU 4-digit resolution.
Precision	±5% of reading at 0 – 400 NTU ±10% of reading at 400 – 4000 NTU
Operating temperature	0 to 50 °C
Body material	Chemical resistant PVC
Protection	IP67
Wire	Maximum 150m
Body material	PVC
Maximum working pressure	6 Bar

Technical drawing of the TU8182 turbidimeter

Other products

Dual Resolution Incremental Encoder I/63MP

Carcasa Ø63 mm, eje Ø9,52 h7 | 100/127 a 2000/2540 imp/vuelta | Conteo up/down imperial o métrico | Salida driver 26LS31 | Alimentación 5 V ±5 % | IP65 eje (IP66 sellado) | Conector de 10 contactos

Encoder, Incremental Encoder, Dual Resolution Incremental Encoder, SENSORS

B&C SZ1031 pH Sensor

pH sensor for range 0 to 13pH with BNC connector Compatible with all controllers on the market

Water quality, SENSORS, pH and Redox Probes

I/40F Miniature Incremental Encoder

Threaded flange 18×1 | Housing Ø40 mm, shaft Ø6 h7 (Ø8 optional) | 10–2500 rpm | NPN, push-pull, line driver | 5 V ±5 % or 12–24 V | IP52 shaft (IP65 with retainer, option Q) | Max. frequency 180 kHz

Encoder, Incremental Encoder, Miniature Incremental Encoder, SENSORS

Torque Sensor F3iS 30000-50000 Nm | 10,000 RPM | DIN Certified Calibration

Digital PCM Transmission | 30,000 – 50,000 N·m | 10,000 RPM | PCD Flange 290.0 mm | Inertia 0.5695 kg·m²

Very high torque (10,000-150,000 Nm), Rotary, Torque sensor

Schreiber SM62 Series Inductive Angle Sensor | LVDT Angular Ø 58 mm

Angular LVDT | Ranges 30° to 120° | Accuracy up to 0.25% | Integrated Electronics | Robust Housing Ø 58 mm | Outputs 4-20mA / ±10V

Displacement, Angled LVDT, SENSORS, LVDT Sensors

DMF FLOW METERS

FUEL FLOW METERS

Caudal, SENSORS

Incremental Encoder for I/170CA Motors

Eje pasante Ø50, 55, 60, 65, 70, 75 | Carcasa Ø170 mm | 1 a 9000 imp/vuelta | NPN, PNP, push-pull, line driver | Alimentación 5–30 V | IP55 eje (IP66 sellado Z) | Acoplamiento tangencial interno

Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS

Single-turn Absolute Encoder A/390A

Housing Ø90, spindle Ø12 h7 | Up to 16384 steps (14 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP66 spindle (IP67 sealed) | Gray, Binary, Excess or BCD

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS

F5C Wired Linear Transducer

Thread Ø 0.51 mm | Stroke 500, 750, 1000 or 1250 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Incremental option (I) | Supply 5, 12 or 24 V ±5 % | Linearity ±0.25 % fs | IP54

Displacement, SENSORS, Linear Cable Transducer, Linear Transducers

SKE

HIGH temperature transducer

Pressure, SENSORS