Standard Incremental Encoder I/58

Budget-friendly price Request a quote
Ø58 mm, square flange | Ø6 h7 stainless steel shaft | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V power supply | IP64 shaft, IP66 sealed | 100 kHz (300 kHz optional)

The ELCIS 58 (I/58) is a general-purpose incremental encoder with a 58 mm diameter square flange, 6 h7 diameter shaft, and a pulse width of 1 to 25,000 pulses per revolution. It features a metal housing, an anodized aluminum base, a VALOX 420 cover, and weighs 330 g. It supports a 3 kg radial/axial load on its stainless steel shaft and operates from 0 to +70 °C with IP64 protection on the shaft side (IP66 sealed, IP53 under torque). Connections are available via cable, connector, cable end connector, or terminal box. Electronics include NPN, PNP, push-pull, 26LS31 and 88C30 drivers, TTL, discriminator, or 1 Vpp sinusoidal output. Power supplies range from 5 to 30 V depending on the version, with a maximum frequency of 100 kHz (300 kHz optional).

The I/58 supports NPN, PNP, push-pull output electronics, 26LS31 and 88C30 drivers, TTL, discriminator and 1 Vpp sinusoidal output, with a power supply of 5 to 30 V depending on the version.

Anodized aluminum base, VALOX 420 cover and stainless steel shaft Ø6 h7 that supports 3 kg of radial/axial load. It works from 0 to +70 °C with IP64 protection on the shaft side (IP66 sealed, IP53 under torque) and is connected by cable, connector, cable end connector or terminal box.

  • Resolution of 1 to 25000 pulses per lap and frequency up to 100 kHz (300 kHz optional).
  • Nutrition 5 to 30 V according to the version.
  • NPN, PNP, push-pull output electronics, 26LS31 and 88C30 drivers, TTL, discriminator and sinusoidal 1 Vpp.
  • Until 12000 rpm continuous with low torque bearings and 8000 rpm in standard version.

Technical Frequently Asked Questions

What signal versions does the I/58 offer?

Unidirectional (M), bidirectional (B), bidirectional + zero (BZ) and unidirectional + zero (MZ).

What supply voltages does it support?

5 V ±5 %, 8–24 V, 18–28 V, 8–15 V, 12 V ±5 %, 24 V ±5 %, 12–30/12 V, 8–24/5 V, 10–30 V, 18–28/5 V and 15–30/15 V. With 88C30 driver, maximum 15 Vdc.

What axle protection options are available?

IP64 in standard version, IP66 with sealed bearing (option Z, 3000 rpm continuous) and IP53 with low torque bearings (option B, 12000 rpm continuous).

Properties

FeatureSpecification
Mechanics
HousingMetal Ø58 mm
Weight330 g
AxisØ6 h7 stainless steel (customizable upon request)
max radial/axial load.3 kg
Electric
Exit-side protectionAccording to connection: IP00 to IP67 (see technical data sheet)
Feeding5–30 V according to version (see technical specifications)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap1 to 25000
Max frequency.100 kHz (300 kHz optional)
Protection and environment
axle-side protectionIP64 standard • IP66 sealed (Z) • IP53 low torque (B)
max. continuous RPM8000 standard · 3000 sealed · 12000 low torque (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/58-100-1828-BP-CWI581001828BPCW100 pulses/revolution · 18–28 V · bidirectional · PNP · 1 m cable · IP65 · axial output
I/58-1000-5-BN-CMI5810005BNCM1000 pulses/revolution · 5 V ±5 % · bidirectional · Driver 26LS31 · Standard 7-pin connector · IP65 · axial output
I/58-10000-5-BZ-K-CLI58100005BZKCL10000 pulses/revolution · 5 V ±5 % · bidirectional + zero · NPN open collector · 10-pin standard connector · IP65 · axial output
I/58-10000-5-BZ-N-VL-R-01I58100005BZNVLR0110000 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · Cable with standard 10-pin connector · radial output
I/58-1024-1828-BZ-B-CM-RI5810241828BZBCMR1024 pulses/revolution · 18–28 V · bidirectional + zero · Push-pull PRO · 7-pin standard connector · IP65 · radial output
I/58-1024-824-BZ-B-CM-RI581024824BZBCMR1024 pulses/revolution · 8–24 V · bidirectional + zero · Push-pull PRO · 7-pin standard connector · IP65 · radial output
I/58-20-1030-MB-CWI58201030MBCW20 pulses/revolution · 10–30 V · unidirectional · Push-pull PRO · 1 m cable · IP65 · axial output
I/58-200-1828-MB-CW-01I582001828MBCW01200 pulses/revolution · 18–28 V · unidirectional · Push-pull PRO · Cable · IP65 · axial output
I/58-20000-5-BZ-N-CLI58200005BZNCL20000 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · 10-pin standard connector · IP65 · axial output
I/58-3000-5-BZ-N-CLI5830005BZNCL3000 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · 10-pin standard connector · IP65 · axial output
I/58-500-5-BZ-B-CW-R-01I585005BZBCWR01500 pulses/revolution · 5 V ±5 % · bidirectional + zero · Push-pull PRO · Cable · IP65 · radial output
I/58-500-824-BB-CW-R-10I58500824BBCWR10500 pulses/revolution · 8–24 V · bidirectional · Push-pull PRO · Cable · IP65 · radial output
I/58-5000-5-BZ-N-CL-RI5850005BZNCLR5000 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · 10-pin standard connector · IP65 · radial output
Standard incremental encoder ELCIS I/58
Dimensional drawing of the standard ELCIS I/58 incremental encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Internal elastic coupling | Hollow shaft H7 Ø6, 8, 9.52 or 10 mm | Housing Ø59 mm | 1 to 2540 imp/rev | NPN, push-pull, line driver, TTL | Power supply 5–30 V | IP53 on the shaft side
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø75, 90, 100, 110, 125 | Housing Ø250 mm | 400, 420 … 2304 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP54 shaft side | Internal tangential coupling
ATESTEO LOGO, manufacturer of torque sensors
Inductive Transducer | 1,000 N·m | 20,000 RPM Limit | 101.5 mm PCD Flange | Class 0.02% | Inertia 0.0033 kg·m²
NESA Environmental Meters
0÷2Vdc · 4÷20mA · RS485/Modbus | 0÷100% VWC · 0-20 mS/cm | FDR 70MHz · PT100 | AISI 316L STAINLESS STEEL electrodes | 71 x 45 x 16mm | 12÷24Vdc | IP68
Disibeint Electronic, manufacturer of level sensors and control relays
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
PWM output (10…90 cycles, %), 2 channels | 41.2 x 48.4 mm max. | 12-bit resolution | Customer-supplied D-axis | 5 VDC (4.5…5.5 VDC) | IP67 / IP69K | 60° to 360°
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CAN SAE J1939 | Ø 36 mm | 16 bits per revolution | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP67 / IP69K | Measuring range: 44 revolutions (15840°)
Shopping Basket