NCVR TB INOX * with level relay
Budget-friendly price Request a quote
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
- Manufacturer: Disibeint Electronic
- Category: SENSORS, Level Sensors, Level Sensors for Liquids
General purpose level control for conductive liquids. The amplifier is integrated into the head itself, reducing costs and installation time and facilitating start-up.
Properties
|
Other products
Top Input | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Insulated Base | 2-pin Connector Mil-C-5015
Temperature and humidity transmitter. For ambient and duct use. Output signal: 4-20 mA, 0-10 VDC, and RS485.
CAN SAE J1939 | 41.5 x 58 mm max. | 14-bit resolution | 6 mm shaft diameter | 12/24 VDC (8 … 34 VDC) | IP67 / IP69K | 1 or 2 channels
Thread Ø 0.5 mm, 10 m/s | Stroke up to 1500 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP43 mechanical)
Wire diameter 0.51 mm | Stroke 200, 500 or 750 mm | Potentiometric output (divider) | Potentiometer 1 kΩ | Incremental 0.1 mm (5 or 24 V) | Linearity ±0.25 % fs | IP50
Conductivity ranges from 10mS to 2,000mS 4/20mA output
0-1Vdc, 4-20mA, RS485/Modbus | 0-100% RH | Thin-film capacitive | 26 x 220 mm | 10-30Vdc | Weight < 80 g
Incremental output | 4 CNC pushbuttons, stop mushroom button | Resolution and axis switches | 100 impedances/revolution with latching | NPN, PNP, push-pull, driver | 5V or 8–28V power supply | IP64 axis (IP65 output)
Housing Ø90 mm, servo flange | Shaft Ø10 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (300 kHz optional)