Membrane
CNM SERIES
- Category: SENSORS, Level Sensors, Level sensors for solids
LEVEL SENSORS FOR SOLIDS
Properties
Level control of easy-flow solid products at atmospheric pressure.
The controller membrane must be exposed to the material to be controlled. As the material entering the silo piles up and covers the membrane, the pressure exerted by the membrane forces it back, triggering the switch housed in the box.
Optional membranes in Neoprene, Viton, Stainless Steel
Product density: 0.3..2.5 t/m³
Other products
General Purpose | Stainless Steel | TNC Connector | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Non-Insulated Base | IP65 Protection | Range ±80g | Weight 110g | Temp. -25 to 120°C
ATEX Ex d IIC T6 certified | Ø80 mm aluminum housing with servo-type flange | 24 or 25-bit multi-turn | 4096 steps per revolution in 4096 or 8192 revolutions | Ø10 h7 solid stainless steel shaft | SSI serial output (RS422), Gray code | 100 kHz to 2 MHz clock | Max. radial/axial load 10 kg | IP65 standard and IP66 with sealed bearings (Z) on the shaft side | Power supply 5 V ±10 % or 10–30 V
Temperature and humidity transmitter. For ambient and duct use. Output signal: 4-20 mA, 0-10 VDC, and RS485.
Precision tilt sensor with ranges from ±1…90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º
DPK900 Compact Weather Station
Ø59.5 mm | Hollow shaft Ø4 to Ø10 mm | Elastic coupling | Rotating body for aligning the electrical zero with the mechanical zero | Max. frequency 60 kHz (100 kHz optional) | Resolution 1 to 2540 imp/v | Anodized aluminum base and cover | Weight 110 g | IP53 on the shaft side | NPN, PNP, push-pull, TTL and line driver outputs
NCTE Rotary Torque Sensor | 4000 Series | 1,000 Nm | 5,000-10,000 RPM
Equipment for high-precision inclination measurement on 1 or 2 axes, range +-15º, accuracy 0.005º, resolution 0.001º
Strain Gauges (DMS) | 50 – 10,000 N·m | Stationary Standard | PCD Flanges 84.0 – 196.0 mm