SM.3 Soil moisture, temperature and conductivity sensor

Budget-friendly price Request a quote
0÷2Vdc · 4÷20mA · RS485/Modbus | 0÷100% VWC · 0-20 mS/cm | FDR 70MHz · PT100 | AISI 316L STAINLESS STEEL electrodes | 71 x 45 x 16mm | 12÷24Vdc | IP68

The NESA SM.3 integrates soil temperature, conductivity, and moisture measurements into a single instrument. It uses the FDR (frequency domain reflectometry, 70 MHz) system to measure the soil's dielectric constant and, consequently, the volume of soil moisture content; for temperature, it uses a PT100 resistance temperature detector.

Measurement range: 0–100% VWC humidity, -40°C to +70°C temperature, and 0–20 mS/cm conductivity, with AISI 316L stainless steel electrodes, resistant to fertilizer corrosion, and IP68 rated. Conductivity measurement is only available with Modbus output (SM.3-C). References: SM.3-A (0–2Vdc), SM.3-B (4–20mA), and SM.3-C (RS485/Modbus). Compliant with WMO and CE standards.

Key points

  • Measurement range 0÷100% VWC (humidity), -40°C ÷ +70°C (temperature) and 0 – 20 mS/cm (conductivity, only with Modbus output)
  • Accuracy ± 3% (0-50%) in humidity, ± 0.2°C in temperature and ± 2% FS in conductivity
  • Response time < 1 s
  • Measurement area: 7 cm radius around the probe
  • Outputs 0÷2Vdc, 4÷20mA or RS485/Modbus
  • 12÷24Vdc, maximum consumption 12mA ÷ 60mA
  • IP68, operating temperature -30 ÷ +70°C, ABS, 316L stainless steel tips, 71 x 45 x 16mm

Technical Frequently Asked Questions

What does the SM.3 measure?

It integrates soil moisture measurement (0–100% VWC), temperature (-40°C to +70°C), and conductivity (0–20 mS/cm) into a single instrument. Moisture is obtained using the FDR system (frequency domain reflectometry, 70 MHz), and temperature is measured with a PT100 sensor.

What outputs does the SM.3 offer?

SM.3-A with 0-2Vdc output, SM.3-B with 4-20mA output, and SM.3-C with RS485/Modbus output. All three include a 3m cable and calibration report. Conductivity measurement is only available with the Modbus output (SM.3-C).

What is the operating temperature?

-30 ÷ +70°C, with IP68 protection rating.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeSoil moisture (VWC), temperature and conductivity (EC)
Measurement principleFDR (frequency domain reflectometry, 70MHz)
Temperature sensorPT100 thermistor
Temperature controlAutomatic system
Measurement range, humidity (VWC)0÷100% VWC
Accuracy, humidity (VWC)± 3% (0-50%) ±0.03 m³/m³
Resolution (m³/m³), humidity (VWC)<0.002 m³/m³
Measurement range, temperature-40°C ÷ +70°C
Accuracy, temperature± 0.2°C
Resolution, temperature<0.05°C
Measurement range, conductivity (EC)0 – 20 mS/cm
Accuracy, conductivity (EC)± 2% FS
Resolution, conductivity (EC)<0.001mS/cm
Availability of conductivity (EC)Only with Modbus output (SM.3-C)
Response time< 1 s
Area of measurement7 cm radius around the probe
CalibrationIt comes with a calibration report
Exit signals
Exit sign0÷2Vdc (SM.3-A); 4÷20mA (SM.3-B); RS485/Modbus (SM.3-C)
Power supply, environment, and mechanical data
Feeding12÷24Vdc
Maximum consumption12mA ÷ 60mA
Operating temperature-30 to +70°C
Degree of protectionIP68
Building materialABS
Probe tips316L Stainless Steel
Dimensions71 x 45 x 16mm (tips Ø4 x 55mm; see drawing)
Cable length3 m
StandardWMO
Regulatory complianceEC
ReferenceConfiguration
SM.3-ASM3AOutput: 0–2Vdc; Supply: 0–100% VWC, -40–+70°C; with 3m cable calibration report
SM.3-BSM3BOutput: 4÷20mA · Supply: 0÷100% VWC, -40 ÷ +70°C; with 3m cable calibration report
SM.3-CSM3COutput: RS485/Modbus · Supply: 0÷100% VWC, -40 ÷ +70°C, 0÷20ms; with 3m cable calibration report
NESA SM.3 Multiparameter Soil Sensor
Dimensions of the NESA SM.3 soil moisture, temperature and conductivity sensor

Other products

ATESTEO LOGO, manufacturer of torque sensors
Inductive Telemetry | 100 N·m | 25,000 RPM | PCD Flange 101.5 mm | Inertia 0.00350 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø6 h7, housing Ø44 mm | Centering Ø20 h7 | 1 to 2500 imp/rev | Push-pull or line driver | Power supply 5–24 V (driver: 5 V) | IP54 shaft side | 100 kHz (160 kHz optional)
Dimetix_AG-1
Dimetix DBN-50-050 industrial laser sensor for distance and position measurement up to ~50 m on natural surfaces, with typical accuracy ±5.0 mm @2σ (±2.5 mm @1σ), frequency up to 10 Hz and analog output 0/4-20 mA.
NESA Environmental Meters
µV, 0–1Vdc or 4–20mA | 0–2000 W/m² | 5° field of view | ISO 9060 Class I | Ø 38 mm · 32.5 cm | 1.5 kg
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Integrated counter with display | Display -99.99 to +99.99 | 100 pulses/revolution with latching | NPN, PNP, push-pull, driver | 5V or 8–28V power supply | IP64 shaft (IP65 output)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø10 h8 | Up to 65536 steps (16 bits) | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | Optional preset (P1)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □63.5, shaft Ø9.52 h7 | Up to 1024 steps (10 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP54 shaft (IP65 sealed) | Gray or Excess
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6 or Ø8 mm | Housing Ø46.5 mm | 1 to 5000 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Tangential coupling
ATESTEO LOGO, manufacturer of torque sensors
Inductive Transducer | Limit 5,000 N·m | 15,000 RPM | PCD Flange 155.5 mm | Accuracy 0.02% | Inertia 0.0167 kg·m²
Shopping Basket