Single-turn Absolute Encoder A/359C
- Manufacturer: ELCIS Encoder
- Category: Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS
The ELCIS 359C (A/359C) is a 2-13 bit optical single-turn absolute encoder with hollow shaft and built-in tangential anti-rotation pin, for industrial applications.
As an optical single-turn absolute encoder with LED source and phototransistors, the A/359C offers up to 8192 steps per revolution (13 bits) in Gray, Binary, Excess, BCD, or custom code. Output is parallel, with options for zero, latch, and parity LEDs; SSI serial (RS422) in Gray or Excess; or analog current or voltage (0–10 V) with 10-bit resolution.
It has an anodized aluminum Ø59 mm housing and a hollow stainless steel H7 shaft of Ø6, Ø8, Ø10, Ø12 or Ø15 mm for 4 kg of radial/axial load, withstands impacts of 50 G and vibrations of 12 G, and works between 0 and +70 °C with IP64 protection on the shaft side (IP66 in sealed version).
- Resolution of 2 to 13 bits: until 8192 steps per lap.
- Five power ranges: 5 V and 15 V ±5 %, 8–24 V, 18–28 V and 10–30 V.
- Analog output of 10 bits, in current or in 0–10 V in 360°.
- Option of Parity for automatic checking of output stages.
Technical Frequently Asked Questions
What resolutions does the A/359C offer for each code?
In Gray, Binary and BCD, 8, 16, 32, 64, 128, 256 or 512 steps per revolution; in Gray and Binary, also 1024, 2048, 4096 or 8192; in Excess, Binary and BCD, 10, 100, 500, 1000, 180, 360, 720 or 900; and in Excess and Binary, 1440, 1800, 2000, 2880, 3600 or 4000. Other resolutions available upon request.
What limitations does analog output have?
Converts the 10-bit position (1024 div/revolution) into an analog current or voltage (0–10 V) for 360° of rotation. Available only with 15 V or 18–28 V power supply and 1024 resolution.
Can the SSI interface be used with binary or BCD code?
No. The SSI serial output is only available with Gray or Excess code. For Binary or BCD, the parallel interface is used, where the Latch input is standard.
Properties
| Feature | Specification |
|---|---|
| Mechanics | |
| Housing | Ø59 mm |
| Axis | H7 hole: Ø6, Ø8, Ø10, Ø12 or Ø15 mm, stainless steel (others on request) · tangential anti-rotation bolt (customizable on request) |
| max radial/axial load. | 4 kg |
| bearing life | 1.5 × 10⁹ rev (1000 rpm, 1/4 max load) |
| Electric | |
| Interface | Parallel (standard) · SSI (RS422) · analog current or voltage |
| Exit-side protection | IP65 (CV cable) |
| Feeding | 5 V ±5 % · 15 V ±5 % · 8–24 V · 18–28 V · 10–30 V |
| Max. consumption. | 200–400 mA according to number of bits (customizable upon request) |
| Max frequency. | 50 kHz (customizable upon request) |
| Exit codes | Gray, Binary, Excess, BCD, Custom |
| Max resolution. | 8192 steps/turn (13 bit) |
| Protection and environment | |
| axle-side protection | IP64 standard • IP66 sealed • IP53 low torque |
| max. continuous RPM | 6000 standard · 3000 sealed · 8000 low torque (intermittent: +30 %) |
| Impact/vibration resistance | 50 G (11 ms) 12 G (10–2000 Hz) |
| Operating/storage temperature | 0 … +70 °C / -30 … +85 °C (customizable upon request) |
| Reference | Configuration |
|---|---|
| A/359C6-B-8192-1030-B-CV-R-01A359C6B81921030BCVR01 | Ø6 shaft · Binary · 8192 steps/revolution · 10–30 V · Push-pull + PTC (1–12 bit) · 1 m cable · IP65 · radial output |
| A/Z359C15-G-1024-1828-B-CV-R-01AZ359C15G10241828BCVR01 | Sealed bearings · Ø15 shaft · Gray · 1024 steps/revolution · 18–28 V · Push-pull + PTC (1–12 bit) · 1 m cable · IP65 · Radial output |


Related documentation, cases, and guides
Other products








