DPF-MIC02
NDIR CO2 controller sensor (4000 ppm) RS485 output with LED signaling
- Manufacturer: DPF Sensors
- Category: SENSORS, Gas Sensors
NDIR CO2 controller sensor (4000 ppm) RS485 output with LED signaling
For interiors
With ModBus RS485 communication and 0-10 vdc analog signal + 8 amp NA relay
9…24 Vdc
Properties
Other products
Top Output | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Range ±80g | IEPE Power Supply | Temp. -55 to 140°C | IP67 Protection | Stainless Steel | Insulated Base | 2-pin Connector Mil-C-5015
Top Input | Sensitivity 100mV/g | Lightweight Design (45g) | Frequency 2Hz-10kHz | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | 3-pin Connector 62GB
LVDT Sensor | Ranges 30°, 60°, 90°, 120° | Accuracy up to 0.25% | External (SM60) or Integrated (SM61) Electronics | Housing Ø 36.5 mm
Ø115 mm flange type B10 | Resolution 2²⁴ in 4096 revolutions | Gray / Binary / BCD codes | Parallel or SSI interface | Power supply 5 V / 8–24 V / 18–28 V | Ø11 h7 stainless steel spindle | Max. load 7 kg | IP64 spindle side (IP65 sealed) | 4000 rpm continuous | Weight 1500 g
Industrial pressure sensor, -1.0 /…2.5 /0…6 /0…10 /…16 /0…25 /0…60 /… 100 /…250 /…400 /….600 Bar, 4-20 mA output, via M12 connector, 1/4″ thread
Hollow Stainless Steel Shaft | Aluminum Base | Valox 420 Cap | Weight 290g | Maximum Load 6kg | Continuous RPM 3000 | Starting Torque 60gcm | Bearing Life 1.5×10^9 Rev | Impact Resistance 50G | Shaft Side IP Rating 65
Graphite sensor with built-in NTC10K, 3m cable, K=1 cm⁻¹Range from 2MicroSiemens to 2,000 milliSiemens,
Combined pH electrode with glass body and double ring junction, range 0–13 pH, 9m cable and online service up to 10 bar.
Resistive linear position sensor with spring probe • up to 200 mm • ±0.1 % FS