Class A rocker rain gauge PL1000 and PL1000R

Budget-friendly price Request a quote
Reed, 0÷2Vdc, 4÷20mA, RS485 / Modbus | Class A | 1000 cm² | 0.2 mm/imp. | 0÷600 mm/h | 10÷30Vdc

The NESA PL1000 is a Class A tipping bucket rain gauge with an anodized aluminum cylindrical body and a 1000 cm² collection area. A funnel-shaped orifice with a filter directs the rainwater onto a stainless steel tipping bucket supported by a blade system, and a reed switch detects its movements, filtering out electrical and mechanical noise. The PL1000R model includes a heater for cold climates, and the MCS module normalizes the signal.

Maximum counting intensity 0÷600 mm/h, sensitivity 0.2 mm, conversion constant 0.2 mm/imp. and average accuracy ±2% @30mm/h (±0.10mm/min). Output N by reed dry contact pulses, A 0÷2Vdc, B 4÷20mA and C RS485 / Modbus; power supply 10÷30Vdc.

Key points

  • Class A according to UNI 11452:2012 and UNI 17277:2020; WMO standards and CE regulations
  • Capture area 1000 cm²; sensitivity 0.2 mm; conversion constant 0.2 mm/imp.
  • Maximum counting intensity 0÷600 mm/h; average accuracy ±2% @30mm/h (±0.10mm/min)
  • Output N: pulses by dry reed contact (R < 250 Ω; switching time < 10 ms); outputs A, B and C with 0÷100 mm accumulation and auto-reset at 100 mm
  • Power supply 10÷30Vdc; PL1000R heater max. 60W@12Vdc with integrated temperature control system
  • Operating conditions 0 ÷ 80°C (-40 ÷ +80°C with heater); 3.5kg with stand

Technical Frequently Asked Questions

What intensity and precision does it have?

Maximum counting intensity 0÷600 mm/h with average accuracy ±2% @30mm/h (±0.10mm/min). At outputs A, B, and C, the measurement is an accumulated count of 0÷100 mm with automatic reset at 100 mm.

What exits does it have?

N: pulses by dry reed contact (R < 250 Ω). With MCS module: A 0÷2Vdc, B 4÷20mA and C RS485 / Modbus with standard ID 010.

What food and what temperature does it support?

Power supply 10÷30Vdc, typical consumption 4÷20mA in A, B and C. Operating conditions 0 ÷ 80°C; the PL1000R, with heater of max. 60W@12Vdc, -40 ÷ +80°C.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudePrecipitation
ClassAccording to UNI 11452:2012 and UNI 17277:2020
Transducer typeStainless steel rocker arm with magnetic reed switch
Switching time< 10 ms
Catchment area1000 cm²
Conversion constant0.2 mm/imp.
Sensitivity0.2 mm
Measurement range (N)Unlimited reed contact
Measurement range (A, B, C)Accumulated 0÷100 mm with auto-reset at 100 mm
Maximum counting intensity0÷600 mm/h
Average accuracy±2% @30mm/h (±0.10mm/min)
Regulatory complianceWMO standards and CE standards
Exit signals
Exit NReed dry contact impulses (R < 250 Ω)
Output A (with MCS module)0÷2Vdc (0÷100 mm)
Output B (with MCS module)4÷20mA (0÷100 mm)
Output C (with MCS module)RS485 / Modbus, Standard ID 010
Output resistance100mΩ / 1MΩ
Power supply, environment, and mechanical data
Feeding10÷30Vdc
Typical consumption (A, B and C)4÷20mA
Heater power supply (PL1000R)Max. 60W@12Vdc
Temperature control (PL1000R)Integrated temperature control system
ProtectionsPolarity reversal and transient protection; anti-bounce circuit
Operating temperature0 ÷ 80°C
Temperature with heater (PL1000R)-40 to +80°C
MaterialAnodized anticorodal aluminum alloy, painted white; stainless steel rocker arm
FlangeFor posts with a max. diameter of 59/80 mm
Weight3.5kg with stand
ReferenceConfiguration
PL1000-APL1000AHeater: No · Output: 0÷2Vdc (0÷100 mm) · Class A according to: UNI 17277:2020 calibration procedure · Supplied: With flange for posts of max. Ø 59/80 mm and calibration report
PL1000-BPL1000BHeater: No · Output: 4÷20mA (0÷100 mm) · Class A according to: UNI 17277:2020 calibration procedure · Supplied: With flange for poles of max. Ø 59/80 mm and calibration report
PL1000-CPL1000CHeater: No · Output: RS485 / Modbus, Standard ID 010 · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for poles of max. Ø 59/80 mm and calibration report
PL1000-NPL1000NHeater: No · Output: Pulses · Class A according to: UNI 17277:2020 calibration procedure · Supplied: With flange for posts of max. Ø 59/80 mm and calibration report
PL1000R-APL1000RAHeater: Max. 60 W, with integrated temperature control system · Output: 0÷2Vdc (0÷100 mm) · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for posts of max. Ø 59/80 mm and calibration report
PL1000R-BPL1000RBHeater: Max. 60 W, with integrated temperature control system · Output: 4÷20mA (0÷100 mm) · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for posts of max. Ø 59/80 mm and calibration report
PL1000R-CPL1000RCHeater: Max. 60 W, with integrated temperature control system · Output: RS485 / Modbus, Standard ID 010 · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for poles of max. Ø 59/80 mm and calibration report
PL1000R-NPL1000RNHeater: Max. 60 W, with integrated temperature control system · Output: Pulses · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for posts of max. Ø 59/80 mm and calibration report
NESA PL1000 Class A Dipper Rain Gauge
Dimensions and connector of the NESA PL1000 Class A tipping bucket rain gauge

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square □45, Ø4 h7 shaft | Up to 256 steps (8 bits) | Parallel NPN open collector | 5 V ±5 % | IP64 shaft (IP65 sealed) | Gray, Excess or custom
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø38 mm, shaft Ø6.35 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
ATESTEO LOGO, manufacturer of torque sensors
500 · 1000 N·m | Clase 0,05 % | 15 000 rpm (25 000 opc.) | Rotor Ø122 mm | Taladros 101,5 mm | RS422, tensión, corriente, bus CAN
Produal logo
Differential pressure transducer for air and liquids
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 0.51 mm | Stroke 1000, 1500 or 2000 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Incremental option (I) | Supply 5, 12 or 24 V ±5 % | Linearity ±0.25 % fs | IP54
NESA Environmental Meters
0-1Vdc, 4-20mA, RS485/Modbus | 0-100% RH | Thin-film capacitive | 26 x 220 mm | 10-30Vdc | Weight < 80 g
DPF Sensors logo
Monoaxial or biaxial, Range ±10° to ±90º, Monoaxial to ±180º Outputs 4…20- 0-5VDC, RS-232, Modbus, Canbus, Accuracy ±0.1º and repeatability of ±0.05
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current, or ratiometric output | Ø 48 mm | 12-bit resolution | Shaftless: magnetic position marker | 5 VDC, 12/24 VDC, or 24 VDC | IP67 / IP68 / IP69 | 1 or 2 channels
NESA Environmental Meters
8-32 differential inputs @24bit | 5 digital inputs | Linux with Apache web server | USB, RS232, RS485, Ethernet | -40 to +70°C | IP20 | 200 x 110 x 74.5 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Flange Ø115, shaft Ø11 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Shopping Basket