DP 100.xx
Wind speed sensor, industrial anemometer made of metal or carbon fiber, with different types of output signals
- Manufacturer: DPF Sensors
- Category: Meteorology – Climatology, SENSORS, Wind
The DP100-xx series anemometers are designed to accurately and reliably measure wind speed under harsh environmental conditions.
Two versions, made of aluminum or carbon fiber.
Range 0-45 m/s, Output signal 4-20 mA, 0-5 Vdc, RS485, RS232, PNP pulse
Properties
Other products
Adapts digital signals from one type and/or level to another.
PROFIBUS-DP Class 2, 12 Mbaud | B10 flange, Ø11 h7 shaft | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP65 shaft (IP66 sealed)
Self-cleaning turbidimeter, Measuring range 0-4,000/40,00/400,0/4,000 NTU
Amplified LVDT | Range 5 to 20 mm | Stainless Steel Housing Ø 10 mm | 5V Power Supply | IP67 | PCD 20.0 mm | Analog Output 0-4V DC
Electrochemical sensor | From 1% to 100% | Titanium and Zinc | 4–20 mA, RS485/MODBUS RTU | Up to 10 bar
Magnetostrictive | Stroke 50 … 4250 mm | Voltage or current output | Linearity ≤ ±0.02 % FS | 16 bits | IP67 / IP68
Output 10-100mV/g | Frequency 2Hz-8kHz | Negative Power Supply -24VDC | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Isolated AC Output | Isolated Base | 3-Wire Connection | Top Entry Mounting
Humidity and temperature sensor for walls, ducts and exteriors
Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.
True RMS AC/DC voltage and current isolator