Explosion-proof Incremental Encoder I/0Q80EXS

Budget-friendly price Request a quote
Square flange □80 | Shaft Ø10 h7 | 1 to 10000 imp/rev | NPN, PNP, push-pull, line driver | 5–30 V | IP65 shaft (IP66 sealed) | ATEX II 2 GD, Ex d IIC T6/T5

The ELCIS 0Q80EXS (I/0Q80EXS) is an explosion-proof incremental encoder with a □80 square flange and a Ø10 h7 shaft, with a capacity of 1 to 10,000 pulses per revolution. It is designed for working environments with explosive atmospheres of gas «G» and dust «D», excluding firedamp mines, and is ISSeP certified according to CENELEC standards, with markings II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X (T5: T100°C) according to EN60079-0, EN60079-1 and EN60079-31, within the ISSeP07ATEX018X certificate notified by CESI02ATEX138Q. Its output electronics include NPN, PNP, push-pull, 26LS31 and 88C30 drivers, TTL, discriminator, and 1 Vpp sinusoidal output, available in unidirectional, bidirectional, and zero-channel versions. The output cable is permanently connected.

Marked II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X (T5: T100°C) according to EN60079-0, EN60079-1 and EN60079-31, with ISSeP07ATEX018X certificate notified by CESI02ATEX138Q.

NPN, PNP, push-pull output electronics, 26LS31 and 88C30 drivers, TTL, discriminator and 1 Vpp sinusoidal output, in unidirectional, bidirectional and zero channel versions. Permanently connected output cable.

  • Square flange □80, casing Ø80 and stainless steel shaft Ø10 h7.
  • Ambient temperature -20 to +60 °C on T5 and -20 to +40 °C in T6.
  • 1 to 10000 pulses per lap and up 100 kHz (300 kHz optional).
  • IP65 on the axis side (IP66 with sealed bearing) and 6000 rpm continuous (3000 rpm with sealing).
  • Nutrition 5 to 30 V according to the version.

Technical Frequently Asked Questions

What is the difference between the T5 and T6 versions?

In T6 (standard) the maximum surface temperature of the housing is 85 °C and the ambient temperature is -20 to +40 °C; in T5, it's 100 °C surface and -20 to +60 °C ambient. The unbreakable disc (option Y) is only available in T6.

How do you connect the cable in an explosive atmosphere?

The encoder uses a cable rated for at least 100°C, permanently connected. The connection must be made to an Ex junction box or outside of a potentially explosive atmosphere; the cable end connector is only permitted outside of explosive atmospheres. Special conditions for safe use (symbol X): mounting screws must be of grade 8.8 or higher.

Can it be used in mines with firedamp?

No. It is built for use in all locations except firedamp mines.

Properties

FeatureSpecification
Mechanics
FlangeSquare, □80 mm
HousingØ80 mm
Weight1300 g
AxisØ10 h7 stainless steel (customizable upon request)
max radial/axial load.10 kg
Electric
Exit-side protectionIP66 cable • IP65 cable end connector
Feeding5–30 V (see feeding table)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap1 to 10000
Max frequency.100 kHz (300 kHz optional)
Protection and environment
axle-side protectionIP65 standard · IP66 sealed (Z)
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Room temperature (ATEX)T5: -20 … +60 °C · T6: -20 … +40 °C
ReferenceConfiguration
I/0Q80EXS5-50-824-BK-VM-R-01I0Q80EXS550824BKVMR0150 pulses/revolution · 8–24 V · bidirectional · NPN open collector · Cable with standard 7c connector · radial output
ELCIS I/0Q80EXS explosion-proof incremental encoder
Dimensional drawing of the explosion-proof incremental encoder ELCIS I/0Q80EXS

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø27 mm | Solid shaft Ø6.35 h7 | 50–800 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 0.9 mm, 8 m/s | Stroke up to 3000 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP53 mechanical)
ATESTEO LOGO, manufacturer of torque sensors
Digital Optical Transmission | 2,500 – 20,000 N·m | 6,500 RPM | PCD Flange 196.0 mm | Inertia 0.0788 kg·m²
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel reference pH electrode, epoxy body. 1.5m cable with BNC.
Dimetix_AG-1
For travel distances of a few meters and up to ~50 m, with typical accuracy of ±1 mm @2σ, 100 Hz and extended thermal range of -40 to +60 °C.
DPF Sensors logo
Digital pressure transducer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Internal elastic coupling | Hollow shaft H7 Ø6, 8, 9.52 or 10 mm | Housing Ø59 mm | 1 to 2540 imp/rev | NPN, push-pull, line driver, TTL | Power supply 5–30 V | IP53 on the shaft side
Monitran-Logo
Dual output: 4-20 mA proportional to RMS speed + AC proportional to acceleration | AC 100 mV/g 50 mV/g | 2 Hz to 1 kHz ±10% (mm/s) | 12-32 V DC | -25 to 90 °C | Stainless steel, IP67 / IP68 (1186W)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø30, 35, 40 or 42 mm | 1 to 5000 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP65 shaft side | 100 kHz | Internal tangential coupling
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
2 cantilever metric casters | Wheels Ø79.8 mm | 1, 10 or 1000 mm/imp | NPN or push-pull | 5 V ±5 % or 12–24 V | IP52 shaft; IP65 wired output | Up to 180 kHz
Shopping Basket