Explosion-Proof Multi-Turn Absolute Encoder A/0L80EXS

Budget-friendly price Request a quote
Hollow shaft Ø6–12 mm | Internal coupling | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with option Z) | ATEX Ex d IIC T6

The ELCIS 0L80EXS (A/0L80EXS) is a 24 or 25-bit explosion-proof, multi-turn absolute encoder with a Ø6÷12 hollow shaft and internal coupling. Approved by ISSeP according to CENELEC standards, it is suitable for locations with potentially explosive atmospheres (except firedamp), and is marked II 2 G Ex d IIC T6 and D Ex tD A21 IP6X T85°C.

Resolution of 4096 steps per revolution (12-bit) in 4096 revolutions (12-bit) or 8192 revolutions (13-bit), in Gray code, with magnetic sensors. SSI serial interface with RS422 transmission and clock frequency of 100 kHz to 2 MHz. Ordering resolution: 12 (Gray 4096 × 4096) or 13 (Gray 4096 × 8192).

Aluminum housing with internal coupling (max. coupling compensation: axial ±0.25 mm, radial ±0.05 mm, angular ±1°), hollow stainless steel shaft Ø6–12 mm (codes 6, 7, 8, 9 = Ø9.52 mm, 1 = Ø11 mm, and 2 = Ø12 mm), and a weight of 1680 g. Connection via 1 m IP66 cable (CV3) or 26c IP65 cable end connector (VM5, TM5, only outside the explosion-risk area). The encoder is supplied with a cable suitable for a minimum temperature of 100 °C permanently connected to it. Options: sealed bearings (Z), stainless steel housing (N), tropicalization (G), and variants according to specification (X).

  • Marked II 2 G Ex d IIC T6 and D Ex tD A21 IP6X T85°C, ISSeP07ATEX018X certificate.
  • Internal coupling; max. coupling compensation: axial ±0.25 mm, radial ±0.05 mm, angular ±1°.
  • Multi-turn 24 or 25 bit: 4096 steps per lap in 4096 u 8192 turns.
  • Exit SSI series (RS422) in Gray code, clock of 100 kHz to 2 MHz.
  • Hollow stainless steel shaft Ø6÷12, max. radial/axial load. 10 kg.

Technical Frequently Asked Questions

What electronic output and interface does the 0L80EXS multi-turn encoder have?

SSI serial interface (MS) in Gray code, with SSI serial electronics (5), RS422 transmission and supported clock frequency from 100 kHz to 2 MHz.

What resolution, axis, and power supplies does it support?

24 or 25 bit resolution: 4096 steps per revolution in 4096 revolutions (code 12) or 8192 revolutions (code 13). Hollow stainless steel shaft Ø6÷12 (codes 6, 7, 8, 9 = Ø9.52, 1 = Ø11 and 2 = Ø12). Power supply 5 V ±10 % or 10÷30 V.

What connections and IP rating does it support?

1 m IP66 cable (CV3) or 26c IP65 cable end connector (VM5) and 26c sealed IP65 (TM5), these two only outside the explosion-risk area. Shaft side: IP65 standard and IP66 with sealed bearings (Z). Ambient temperature T6: -20 … +40 °C.

Properties

FeatureSpecification
Mechanics
Weight1680 g
AxisHollow shaft Ø6÷12 stainless steel (Ø10 standard)
Maximum coupling compensationAxial ±0.25 mm · radial ±0.05 mm · angular ±1°
max radial/axial load.10 kg
Starting torque18 g·cm standard · 50 g·cm with sealed bearings (Z)
Electric
Exit-side protectionAccording to connection: IP66 cable, connector at IP65 end of cable
Max resolution.4096 (12 bit) in 8192 turns (13 bit); 24 or 25 bit multiturn
Exit code and interfaceGray · SSI (MS), RS422 transmission
Maximum clock frequency2 MHz (supported clock: from 100 kHz to 2 MHz)
Feeding10÷30 Vcc, 5 V ±10 %
Max. consumption.1,2 W
Protection and environment
axle-side protectionIP65 standard · IP66 with sealed bearings (Z) (IP rating according to CEI EN 60529, EN 60529, IEC 529)
max. continuous RPM6000 standard · 3000 with sealed bearings (Z)
Impact/vibration resistance50 G (11 ms) · 12 G (10 ÷ 2000 Hz)
TemperatureOperating -20 … +70 °C • ambient (T6) -20 … +40 °C • storage -30 … +85 °C
ReferenceConfiguration
A/0L80EXS-12-1030-MS-5-CV3-RA0L80EXS121030MS5CV3RGray 4096 × 4096 · 10 ÷ 30 V · version: MS · electronics: 5 · 1 m cable, IP66 · radial output
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/0L80EXS explosion-proof absolute encoder
Dimensional drawing of the explosion-proof absolute encoder ELCIS A/0L80EXS

Related documentation, cases, and guides

Other products

LVDT Manufacturer Logo Schreiber Messtechnik
LVDT Sensor | Ranges 30°, 60°, 90°, 120° | Accuracy up to 0.25% | External (SM60) or Integrated (SM61) Electronics | Housing Ø 36.5 mm
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
PH sensor for range 0 to 13pH with 9m cable Compatible with all controllers on the market
DPF Sensors logo
Combined wind speed and direction sensor
ATMOSPHERIC pressure transducer
ATESTEO LOGO, manufacturer of torque sensors
Dual Inductive Metrology | Limit 3000 N·m | 16,000 RPM | PCD Flange 130.0 mm | Accuracy 0.05% | Inertia 0.0092 kg·m²
NESA Environmental Meters
Reed, 0÷2Vdc, 4÷20mA, RS485 / Modbus | Class A | 1000 cm² | 0.2 mm/imp. | 0÷600 mm/h | 10÷30Vdc
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Square flange □45 mm | 100 imp/revolution with latching | 1–2500 imp/revolution (option F) | NPN, PNP, push-pull, driver | 5 V or 8–28 V depending on version | IP64 shaft side (IP65 cable)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Built-in mechanics, IP54 | B10 flange Ø115 mm | Housing Ø96 mm, shaft Ø11 h7 | 1 to 3600 rpm | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 with Z option)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, Gray or BCD output | Stroke up to 5000 mm | Resolution 0.1 or 1 mm | 5 V ±5 %, 8–24 V or 18–28 V | IP64 | Accuracy ±0.2 mm | Max. frequency 25 kHz
Shopping Basket